3.3.14 rt_control_31_00_next

Configures the timeout settings for each QoS encoding.

The rt_control_31_00_next register characteristics are:
Usage constraints
Can be read from when in ALL states. Can be written to when in ALL states.
Configurations
There is only one DMC configuration.
Attributes
Offset
0x040
Type
Read-write
Reset
0x00000000
Width
32
The following figure shows the bit assignments.
Figure 3-14 rt_control_31_00_next register bit assignments
To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.

The following shows the bit assignments.
[31:28] qos7_timeout_next
Program the number of timeout prescaler periods to wait before elevating a received request to maximum priority. Zero disables this feature for request received with this QoS value. The supported range for this bitfield is 0-15.
[27:24] qos6_timeout_next
Program the number of timeout prescaler periods to wait before elevating a received request to maximum priority. Zero disables this feature for request received with this QoS value. The supported range for this bitfield is 0-15.
[23:20] qos5_timeout_next
Program the number of timeout prescaler periods to wait before elevating a received request to maximum priority. Zero disables this feature for request received with this QoS value. The supported range for this bitfield is 0-15.
[19:16] qos4_timeout_next
Program the number of timeout prescaler periods to wait before elevating a received request to maximum priority. Zero disables this feature for request received with this QoS value. The supported range for this bitfield is 0-15.
[15:12] qos3_timeout_next
Program the number of timeout prescaler periods to wait before elevating a received request to maximum priority. Zero disables this feature for request received with this QoS value. The supported range for this bitfield is 0-15.
[11:8] qos2_timeout_next
Program the number of timeout prescaler periods to wait before elevating a received request to maximum priority. Zero disables this feature for request received with this QoS value. The supported range for this bitfield is 0-15.
[7:4] qos1_timeout_next
Program the number of timeout prescaler periods to wait before elevating a received request to maximum priority. Zero disables this feature for request received with this QoS value. The supported range for this bitfield is 0-15.
[3:0] qos0_timeout_next
Program the number of timeout prescaler periods to wait before elevating a received request to maximum priority. Zero disables this feature for request received with this QoS value. The supported range for this bitfield is 0-15.
Non-ConfidentialPDF file icon PDF versionARM 100000_0001_00_en
Copyright © 2014 ARM. All rights reserved.