3.3.21 queue_threshold_control_63_32_next

Configures the threshold settings for requests in the DMC

The queue_threshold_control_63_32_next register characteristics are:
Usage constraints
Can be read from when in ALL states. Can be written to when in ALL states.
Configurations
There is only one DMC configuration.
Attributes
Offset
0x064
Type
Read-write
Reset
0x00000000
Width
32
The following figure shows the bit assignments.
Figure 3-21 queue_threshold_control_63_32_next register bit assignments
To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.

The following shows the bit assignments.
[31:28] queue_fill_threshold_15_16ths_next
Program to set the priority that requests must be equal to or above, to be accepted when the queue is 15/16ths full. The supported range for this bitfield is 0-15.
[27:24] queue_fill_threshold_14_16ths_next
Program to set the priority that requests must be equal to or above, to be accepted when the queue is 14/16ths full. The supported range for this bitfield is 0-15.
[23:20] queue_fill_threshold_13_16ths_next
Program to set the priority that requests must be equal to or above, to be accepted when the queue is 13/16ths full. The supported range for this bitfield is 0-15.
[19:16] queue_fill_threshold_12_16ths_next
Program to set the priority that requests must be equal to or above, to be accepted when the queue is 12/16ths full. The supported range for this bitfield is 0-15.
[15:12] queue_fill_threshold_11_16ths_next
Program to set the priority that requests must be equal to or above, to be accepted when the queue is 11/16ths full. The supported range for this bitfield is 0-15.
[11:8] queue_fill_threshold_10_16ths_next
Program to set the priority that requests must be equal to or above, to be accepted when the queue is 10/16ths full. The supported range for this bitfield is 0-15.
[7:4] queue_fill_threshold_9_16ths_next
Program to set the priority that requests must be equal to or above, to be accepted when the queue is 9/16ths full. The supported range for this bitfield is 0-15.
[3:0] queue_fill_threshold_8_16ths_next
Program to set the priority that requests must be equal to or above, to be accepted when the queue is 8/16ths full. The supported range for this bitfield is 0-15.
Non-ConfidentialPDF file icon PDF versionARM 100000_0001_00_en
Copyright © 2014 ARM. All rights reserved.