3.3.57 direct_addr

Sets the direct command address field for direct commands.

The direct_addr register characteristics are:
Usage constraints
Can be read from when in ALL states. Can be written to when in CONFIG, PAUSED or READY states.
Configurations
There is only one DMC configuration.
Attributes
Offset
0x108
Type
Read-write
Reset
0x00000000
Width
32
The following figure shows the bit assignments.
Figure 3-57 direct_addr register bit assignments
To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.

The following shows the bit assignments.
[31:0] direct_addr
For more information see direct_cmd command descriptions.
Non-ConfidentialPDF file icon PDF versionARM 100000_0001_00_en
Copyright © 2014 ARM. All rights reserved.