3.3.60 dci_strb

Configures the write data strobe values used during direct_cmd WRITE operations.

The dci_strb register characteristics are:
Usage constraints
Can be read from when in ALL states. Can be written to when in CONFIG, PAUSED or READY states.
Configurations
There is only one DMC configuration.
Attributes
Offset
0x118
Type
Read-write
Reset
0x0000000F
Width
32
The following figure shows the bit assignments.
Figure 3-60 dci_strb register bit assignments
To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.

The following shows the bit assignments.
[31:4] Reserved_1
Unused bits
[3:0] dci_strb
For write operations, provides the value used to drive DQM, where a value of 1 indicates data must be committed to DRAM. You must write once for each 32-bit data word to write as part of a DRAM burst. Defaults to 4'b1111.
Non-ConfidentialPDF file icon PDF versionARM 100000_0001_00_en
Copyright © 2014 ARM. All rights reserved.