3.3.67 nibble_failed_095_064

Used to inform the DMC that a particular nibble has failed.

The nibble_failed_095_064 register characteristics are:
Usage constraints
Can be read from when in ALL states. Can be written to when in ALL states.
Configurations
There is only one DMC configuration.
Attributes
Offset
0x140
Type
Read-write
Reset
0x00000000
Width
32
The following figure shows the bit assignments.
Figure 3-67 nibble_failed_095_064 register bit assignments
To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.

The following shows the bit assignments.
[31:24] Reserved_1
Unused bits
[23] nibble_failed_rank5_second_valid
Indicates if the second location is valid.
[22:18] nibble_failed_rank5_second
Used to inform the DMC of the second location that has failed. The supported range for this bitfield is 0-17.
[17] nibble_failed_rank5_first_valid
Indicates if the first location is valid.
[16:12] nibble_failed_rank5_first
Used to inform the DMC of the first location that has failed. The supported range for this bitfield is 0-17.
[11] nibble_failed_rank4_second_valid
Indicates if the second location is valid.
[10:6] nibble_failed_rank4_second
Used to inform the DMC of the second location that has failed. The supported range for this bitfield is 0-17.
[5] nibble_failed_rank4_first_valid
Indicates if the first location is valid.
[4:0] nibble_failed_rank4_first
Used to inform the DMC of the first location that has failed. The supported range for this bitfield is 0-17.
Non-ConfidentialPDF file icon PDF versionARM 100000_0001_00_en
Copyright © 2014 ARM. All rights reserved.