Configures the tRPALL timing parameter. This determines the delay applied after a PRECHARGEALL command before any other command is issued to the same rank.
The t_rpall_next register characteristics are:
- Usage constraints
Can be read from when in ALL states. Can be written to when in ALL states.
There is only one DMC configuration.
The following figure shows the bit assignments.
Figure 3-115 t_rpall_next register bit assignments
The following shows the bit assignments.
- [31:5] Reserved_1
- [4:0] t_rpall_next
The supported range for this bitfield is 4-18.