3.3.169 interrupt_clr

Clear register for interrupts.

The interrupt_clr register characteristics are:
Usage constraints
Cannot be read from. Can be written to when in ALL states.
Configurations
There is only one DMC configuration.
Attributes
Offset
0x508
Type
Write-only
Reset
0x00000000
Width
32
The following figure shows the bit assignments.
Figure 3-169 interrupt_clr register bit assignments
To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.

The following shows the bit assignments.
[31:10] Reserved_1
Unused bits
[9] phy_request_int_clr
Program to clear the PHY request interrupt.
[8] arch_fsm_int_clr
Program to clear the architectural fsm interrupt.
[7] temperature_event_int_clr
Program to clear the temperature event interrupt.
[6] link_err_int_clr
Program to clear the link error interrupt.
[5] failed_prog_int_clr
Program to clear the failed programmer's access interrupt.
[4] failed_access_int_clr
Program to clear the failed system access interrupt.
[3] dram_ecc_errd_int_clr
Program to clear the dram uncorrected error interrupt.
[2] dram_ecc_errc_int_clr
Program to clear the dram corrected error interrupt.
[1] ram_ecc_errd_int_clr
Program to clear the ram uncorrected error interrupt.
[0] ram_ecc_errc_int_clr
Program to clear the ram corrected error interrupt.
Non-ConfidentialPDF file icon PDF versionARM 100000_0001_00_en
Copyright © 2014 ARM. All rights reserved.