3.3.170 interrupt_status

Status register for interrupts (pre-mask).

The interrupt_status register characteristics are:
Usage constraints
Can be read from when in ALL states. Cannot be changed.
Configurations
There is only one DMC configuration.
Attributes
Offset
0x510
Type
Read-only
Reset
0x00000000
Width
32
The following figure shows the bit assignments.
Figure 3-170 interrupt_status register bit assignments
To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.

The following shows the bit assignments.
[31:26] Reserved_2
Unused bits
[25] phy_request_int_overflow_status
Shows the status of the PHY request interrupt overflow.
[24] arch_fsm_int_overflow_status
Shows the status of the architectural fsm interrupt overflow.
[23] temperature_event_int_overflow_status
Shows the status of the link failure interrupt overflow.
[22] link_err_int_overflow_status
Shows the status of the link error interrupt overflow.
[21] failed_prog_int_overflow_status
Shows the status of the failed programmer's access interrupt overflow.
[20] failed_access_int_overflow_status
Shows the status of the failed system access interrupt overflow.
[19] dram_ecc_errd_int_overflow_status
Shows the status of the DRAM uncorrected error interrupt overflow.
[18] dram_ecc_errc_int_overflow_status
Shows the status of the DRAM corrected error interrupt overflow.
[17] ram_ecc_errd_int_overflow_status
Shows the status of the RAM uncorrected error interrupt overflow.
[16] ram_ecc_errc_int_overflow_status
Shows the status of the RAM corrected error interrupt overflow.
[15:10] Reserved_1
Unused bits
[9] phy_request_int_status
Shows the status of the PHY request interrupt.
[8] arch_fsm_int_status
Shows the status of the architectural fsm interrupt.
[7] temperature_event_int_status
Shows the status of the temperature event interrupt.
[6] link_err_int_status
Shows the status of the link error interrupt.
[5] failed_prog_int_status
Shows the status of the failed programmer's access interrupt.
[4] failed_access_int_status
Shows the status of the failed system access interrupt.
[3] dram_ecc_errd_int_status
Shows the status of the DRAM uncorrected error interrupt.
[2] dram_ecc_errc_int_status
Shows the status of the DRAM corrected error interrupt.
[1] ram_ecc_errd_int_status
Shows the status of the RAM uncorrected error interrupt.
[0] ram_ecc_errc_int_status
Shows the status of the RAM corrected error interrupt.
Non-ConfidentialPDF file icon PDF versionARM 100000_0001_00_en
Copyright © 2014 ARM. All rights reserved.