3.3.196 escalation_control_now

Configures the settings for escalating the priority of entries in the queue.

The escalation_control_now register characteristics are:
Usage constraints
Can be read from when in ALL states. Cannot be written to and only updated when in CONFIG, LOW-POWER or PAUSED states.
Configurations
There is only one DMC configuration.
Attributes
Offset
0x1034
Type
Read-only
Reset
0x00080000
Width
32
The following figure shows the bit assignments.
Figure 3-196 escalation_control_now register bit assignments
To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.

The following shows the bit assignments.
[31:20] Reserved_3
Unused bits
[19:16] read_backlog_suppression_now
Configures the number of completed reads (as a proportion in 16ths of the queue depth) at which to stop arbitrating more reads until the system drains the fetched read data. Zero disables this feature. The supported range for this bitfield is 0-15.
[15:12] Reserved_2
Unused bits
[11:8] escalation_count_now
Program the number of escalation prescaler periods between applying escalation. Zero disables priority escalation in the queue. The supported range for this bitfield is 0-15.
[7:2] Reserved_1
Unused bits
[1:0] escalation_prescalar_now
Escalation counter prescaler.
Non-ConfidentialPDF file icon PDF versionARM 100000_0001_00_en
Copyright © 2014 ARM. All rights reserved.