Configures the address space control for the DMC default region.
The memory_address_max_31_00_now register characteristics are:
- Usage constraints
Can be read from when in ALL states. Cannot be written to and only updated when in CONFIG, LOW-POWER or PAUSED states.
There is only one DMC configuration.
The following figure shows the bit assignments.
Figure 3-207 memory_address_max_31_00_now register bit assignments
The following shows the bit assignments.
- [31:16] memory_address_max_31_16_now
Program to set bits[31:16] of the maximum memory address.
NoteThis is the address value after the address translation has been
applied (if applicable).
- [15:5] Reserved_1
-  enable_err_response_now
Configures the response used for a request that fails address access checks.
-  region_s_write_en_now
Enables Secure writes to the default region
-  region_s_read_en_now
Enables Secure reads to the default region
-  region_ns_write_en_now
Enables Non-secure writes to the default region
-  region_ns_read_en_now
Enables Non-secure reads to the default region