3.3.269 mux_control_now

Control muxing options for the DMC.

The mux_control_now register characteristics are:
Usage constraints
Can be read from when in ALL states. Cannot be written to and only updated when in CONFIG, LOW-POWER or PAUSED states.
Configurations
There is only one DMC configuration.
Attributes
Offset
0x11F4
Type
Read-only
Reset
0x00000000
Width
32
The following figure shows the bit assignments.
Figure 3-269 mux_control_now register bit assignments
To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.

The following shows the bit assignments.
[31:11] Reserved_1
Unused bits
[10:8] cid_mask_now
Program to mask inclusion of dfi_cid[2:0] output in parity calculation, where for each bit of cid_mask[2:0] a value of 1 means include the corresponding bit of dfi_cid[2:0].
[7:6] rst_mux_control_now
Program to control muxing of dfi_reset_n output for DIMM applications.
[5:4] ck_mux_control_now
Program to control muxing of dfi_ck output for DIMM applications.
[3:2] cke_mux_control_now
Program to control muxing of dfi_cke output for DIMM applications.
[1:0] cs_mux_control_now
Program to control muxing of dfi_cs_n output for DIMM applications.
Non-ConfidentialPDF file icon PDF versionARM 100000_0001_00_en
Copyright © 2014 ARM. All rights reserved.