3.3.276 t_rdpden_now

Configures the tRDPDEN timing parameter. This determines the delay applied after a Read command before a power down command can be issued to the same rank.

The t_rdpden_now register characteristics are:
Usage constraints
Can be read from when in ALL states. Cannot be written to and only updated when in CONFIG, LOW-POWER or PAUSED states.
Configurations
There is only one DMC configuration.
Attributes
Offset
0x1210
Type
Read-only
Reset
0x0000000A
Width
32
The following figure shows the bit assignments.
Figure 3-276 t_rdpden_now register bit assignments
To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.

The following shows the bit assignments.
[31:7] Reserved_1
Unused bits
[6:0] t_rdpden_now
t_rdpden_now bitfield. The supported range for this bitfield is 10-126.
Non-ConfidentialPDF file icon PDF versionARM 100000_0001_00_en
Copyright © 2014 ARM. All rights reserved.