Configures the tRP timing parameter. This determines the delay applied after a PRECHARGE command before any other command is issued to the same bank.
The t_rp_now register characteristics are:
- Usage constraints
Can be read from when in ALL states. Cannot be written to and only updated when in CONFIG, LOW-POWER or PAUSED states.
There is only one DMC configuration.
The following figure shows the bit assignments.
Figure 3-279 t_rp_now register bit assignments
The following shows the bit assignments.
- [31:5] Reserved_1
- [4:0] t_rp_now
The supported range for this bitfield is 4-18.