3.3.280 t_rpall_now

Configures the tRPALL timing parameter. This determines the delay applied after a PRECHARGEALL command before any other command is issued to the same rank.

The t_rpall_now register characteristics are:
Usage constraints
Can be read from when in ALL states. Cannot be written to and only updated when in CONFIG, LOW-POWER or PAUSED states.
Configurations
There is only one DMC configuration.
Attributes
Offset
0x1224
Type
Read-only
Reset
0x00000005
Width
32
The following figure shows the bit assignments.
Figure 3-280 t_rpall_now register bit assignments
To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.

The following shows the bit assignments.
[31:5] Reserved_1
Unused bits
[4:0] t_rpall_now
t_rpall_now bitfield. The supported range for this bitfield is 4-18.
Non-ConfidentialPDF file icon PDF versionARM 100000_0001_00_en
Copyright © 2014 ARM. All rights reserved.