3.3.285 t_rtp_now

Configures the read-to-precharge timing parameter. This determines the READ to PRECHARGE command delay applied between issued commands to the same bank.

The t_rtp_now register characteristics are:
Usage constraints
Can be read from when in ALL states. Cannot be written to and only updated when in CONFIG, LOW-POWER or PAUSED states.
Configurations
There is only one DMC configuration.
Attributes
Offset
0x123C
Type
Read-only
Reset
0x00000004
Width
32
The following figure shows the bit assignments.
Figure 3-285 t_rtp_now register bit assignments
To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.

The following shows the bit assignments.
[31:4] Reserved_1
Unused bits
[3:0] t_rtp_now
t_rtp_now bitfield. The supported range for this bitfield is 4-15.
Non-ConfidentialPDF file icon PDF versionARM 100000_0001_00_en
Copyright © 2014 ARM. All rights reserved.