3.3.286 t_wr_now

Configures the tWR timing parameter. This determines the write recovery time and is used as the delay applied between the issue of a WRITE command and subsequent commands, other than WRITEs, to the same bank. This must take into account CRC timing requirements.

The t_wr_now register characteristics are:
Usage constraints
Can be read from when in ALL states. Cannot be written to and only updated when in CONFIG, LOW-POWER or PAUSED states.
Configurations
There is only one DMC configuration.
Attributes
Offset
0x1244
Type
Read-only
Reset
0x00000005
Width
32
The following figure shows the bit assignments.
Figure 3-286 t_wr_now register bit assignments
To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.

The following shows the bit assignments.
[31:6] Reserved_1
Unused bits
[5:0] t_wr_now
t_wr_now bitfield. The supported range for this bitfield is 5-63.
Non-ConfidentialPDF file icon PDF versionARM 100000_0001_00_en
Copyright © 2014 ARM. All rights reserved.