Non-Confidential | PDF version | ARM 100069_0608_00_en | ||
| ||||
Home > A64 SIMD Scalar Instructions > FCMLA (scalar, by element) |
Floating-point Complex Multiply Accumulate (by element).
FCMLA
Vd
.T
, Vn
.T
, Vm
.Ts
[index
], #rotate
;
FCMLA
Vd
.T
, Vn
.T
, Vm
.Ts
[index
], #rotate
;
Where:
Vd
T
Vn
Vm
Ts
H
or S
.
index
rotate
Supported in ARMv8.3.
Floating-point Complex Multiply Accumulate (by element).
This instruction multiplies the two source complex numbers from the Vm
and the Vn
vector registers and adds the result to the corresponding complex number in the destination Vd
vector register. The number of complex numbers that can be stored in the Vm
, the Vn
, and the Vd
registers is calculated as the vector register size divided by the length of each complex number. These lengths are 16 for half-precision, 32 for single-precision, and 64 for double-precision. Each complex number is represented in a SIMP&FP register as a pair of elements with the imaginary part of the number being placed in the more significant element, and the real part of the number being placed in the less significant element. Both real and imaginary parts of the source and the resulting complex number are represented as floating-point values.
None, one, or both of the two vector elements that are read from each of the numbers in the Vm
source SIMD and FP register can be negated based on the rotation value:
The indexed element variant of this instruction is available for half-precision and single-precision number values. For this variant, the index value determines the position in the Vm
source vector register of the single source value that is used to multiply each of the complex numbers in the Vn
source vector register. The index value is encoded as H:L for half-precision values, or H for single-precision values.
This instruction can generate a floating-point exception. Depending on the settings in FPCR, the exception results in either a flag being set in FPSR or a synchronous exception being generated. For more information, see Floating-point exception traps in the ARM Architecture Reference Manual ARMv8, for ARMv8-A architecture profile.
Depending on the settings in the CPACR_EL1, CPTR_EL2, and CPTR_EL3 registers, and the current Security state and Exception level, an attempt to execute the instruction might be trapped.
The following table shows the valid specifier combinations:
Table 19-3 FCMLA (Scalar) specifier combinations
T |
Ts |
---|---|
4H | H |
8H | H |
4S | S |