17.48 LDSETAB, LDSETALB, LDSETB, LDSETLB

Atomic bit set on byte in memory.

Syntax

LDSETAB Ws, Wt, [Xn|SP] ; Acquire general registers

LDSETALB Ws, Wt, [Xn|SP] ; Acquire and release general registers

LDSETB Ws, Wt, [Xn|SP] ; No memory ordering general registers

LDSETLB Ws, Wt, [Xn|SP] ; Release general registers

Where:

Ws
Is the 32-bit name of the general-purpose register holding the data value to be operated on with the contents of the memory location.
Wt
Is the 32-bit name of the general-purpose register to be loaded.
Xn|SP
Is the 64-bit name of the general-purpose base register or stack pointer.

Architectures supported

Supported in ARMv8.1 and later.

Usage

Atomic bit set on byte in memory atomically loads an 8-bit byte from memory, performs a bitwise OR with the value held in a register on it, and stores the result back to memory. The value initially loaded from memory is returned in the destination register.

  • If the destination register is not WZR, LDSETAB and LDSETALB load from memory with acquire semantics.
  • LDSETLB and LDSETALB store to memory with release semantics.
  • LDSETB has no memory ordering requirements.

For more information about memory ordering semantics see Load-Acquire, Store-Release in the ARM Architecture Reference Manual ARMv8, for ARMv8-A architecture profile.

For information about memory accesses see Load/Store addressing modes in the ARM Architecture Reference Manual ARMv8, for ARMv8-A architecture profile.

Non-ConfidentialPDF file icon PDF versionARM 100069_0608_00_en
Copyright © 2014–2017 ARM Limited or its affiliates. All rights reserved.