12.2 Trigger inputs and outputs

This section describes the trigger inputs and outputs that are available to the CTI.
The following table shows the CTI inputs.

Table 12-1 Trigger inputs

CTI input Name Description
0 DBGTRIGGER, pulsed Pulsed on entry to Debug state
1 PMUIRQa PMU generated interrupt
2 - -
3 - -
4 EXTOUT[0] ETM external output
5 EXTOUT[1] ETM external output
6 EXTOUT[2] ETM external output
7 EXTOUT[3] ETM external output
The following table shows the CTI outputs.

Table 12-2 Trigger outputs

CTI output Name Description
0 EDBGRQ Causes the processor to enter Debug state
1 DBGRESTART Causes the processor to exit Debug state
2 CTIIRQ CTI interrupt
3 - -
4 EXTIN[0] ETM external input
5 EXTIN[1] ETM external input
6 EXTIN[2] ETM external input
7 EXTIN[3] ETM external input
a This signal is the same as nPMUIRQ with inverted polarity.
Non-ConfidentialPDF file icon PDF versionARM 100095_0002_03_en
Copyright © 2014, 2015 ARM. All rights reserved.