12.6.2 CTI Integration Mode Control register

The CTIITCTRL characteristics are:
Purpose
Enables the CTI to switch from its default mode into integration mode, where test software can control directly the inputs and outputs of the processor, for integration testing or topology detection.
Usage constraints
Accessible through the internal memory-mapped interface and the external debug interface. The access conditions are:
Off DLK OSLK EDAD SLK Default
- - - - RO/WI RW
Table 12-3 Cross trigger register summary describes the access conditions.
Configurations
CTIITCTRL is in the Debug power domain.
Attributes
See 12.5 Cross trigger register summary.
shows the CTIITCTRL bit assignments.
Figure 12-3 CTIITCTRL bit assignment
To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.

The following table shows the CTIITCTRL bit assignments.

Table 12-7 CTIITCTRL bit assignment

Bits Name Function
[31:1] - Reserved, RES0.
[0] IME
Integration mode enable. The values are:
0Normal operation.
1Enables integration mode.
Non-ConfidentialPDF file icon PDF versionARM 100095_0002_03_en
Copyright © 2014, 2015 ARM. All rights reserved.