10.10.2 DBGPWRDUP debug signal

This section describes the DBGPWRDUP debug input signal.


You must set the DBGPWRDUP signal LOW before removing power to the core domain. After power is restored to the core domain, the DBGPWRDUP signal must be asserted HIGH. The EDPRSR.PU bit reflects the value of this DBGPWRDUP signal.


DBGPWRDUP must be tied HIGH if the particular implementation does not support separate core and debug power domains.
Non-ConfidentialPDF file icon PDF versionARM 100095_0002_04_en
Copyright © 2014-2016 ARM. All rights reserved.