B1.14 Counter Reload Value Registers 0

The TRCCNTRLDVR0 defines the reload value for the reduced function counter.

Usage constraints
Only accepts writes when the trace unit is disabled.
The count value is only stable when TRCSTATR.PMSTABLE is 1.
If software uses counter0, then it must write to this register to set the counter reload value.
Configurations

Available in all configurations.

Attributes
See the register summary in Table B1-1 ETM-M33 register summary and Table B1-4 Derived resource register.

The following figure shows the TRCCNTRLDVR0 bit assignments.

Figure B1-12 TRCCNTRLDVR0 bit assignments
To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.


The following table shows the TRCCNTRLDVR0 bit assignments.

Table B1-22 TRCCNTRLDVR0 bit assignments

Bits Value Function
[31:16] - res0.
[15:0] VALUE Defines the reload value for the counter. This value is loaded into the counter each time the reload event occurs.
Non-ConfidentialPDF file icon PDF versionARM 100232_0002_00_en
Copyright © 2016, 2017 ARM Limited or its affiliates. All rights reserved.