B1.13 c10 registers

The processor can access different 32-bit wide system registers. Registers where CRn has the value ten are called c10 registers.

The following table shows the 32-bit wide system registers you can access when the processor is in AArch32 state and the value of CRn is c10.

Table B1-13 c10 register summary

Op1 CRm Op2 Name Reset Description
0 c2 0 PRRR UNK

B1.101 Primary Region Remap Register

0 MAIR0 UNK B1.95 Memory Attribute Indirection Registers 0 and 1
1 NMRR UNK B1.99 Normal Memory Remap Register
1 MAIR1 UNK B1.95 Memory Attribute Indirection Registers 0 and 1
c3 0 AMAIR0 0x00000000 B1.36 Auxiliary Memory Attribute Indirection Register 0
1 AMAIR1 0x00000000 B1.37 Auxiliary Memory Attribute Indirection Register 1
4 c2 0 HMAIR0 UNK

Hyp Memory Attribute Indirection Register 0

See the ARM® Architecture Reference Manual ARMv8, for ARMv8-A architecture profile for more information.

1 HMAIR1 UNK

Hyp Memory Attribute Indirection Register 1

See the ARM® Architecture Reference Manual ARMv8, for ARMv8-A architecture profile for more information.

c3 0 HAMAIR0 0x00000000 B1.58 Hyp Auxiliary Memory Attribute Indirection Register 0
1 HAMAIR1 0x00000000 B1.59 Hyp Auxiliary Memory Attribute Indirection Register 1
Non-ConfidentialPDF file icon PDF versionARM 100241_0001_00_en
Copyright © 2016, 2017 ARM Limited or its affiliates. All rights reserved.