C10.2 Programming Control Register

The TRCPRGCTLR characteristics are:

Enables the ETM trace unit.
Usage constraints
See C3.4 Programming and reading ETM trace unit registers.
Available in all configurations.
See C10.1 ETM register summary.
Figure C10-1 TRCPRGCTLR bit assignments
To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.

Reserved, res0.
EN, [0]

Trace program enable:

0The ETM trace unit interface in the processor is disabled, and clocks are enabled only when necessary to process APB accesses, or drain any already generated trace. This is the reset value.
1The ETM trace unit interface in the processor is enabled, and clocks are enabled. Writes to most trace registers are ignored.

The TRCPRGCTLR can be accessed through the external debug interface, offset 0x004.

Non-ConfidentialPDF file icon PDF versionARM 100241_0001_00_en
Copyright © 2016, 2017 ARM Limited or its affiliates. All rights reserved.