C10.54 Integration Mode Control Register

The TRCITCTRL characteristics are:

Enables topology detection or integration testing, by putting the ETM trace unit into integration mode.
Usage constraints
ARM recommends that you perform a debug reset after using integration mode.
Available in all configurations.
See C10.1 ETM register summary.
Figure C10-53 TRCITCTRL bit assignments
To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.


Reserved, res0.

IME, [0]

Integration mode enable bit. The possible values are:

0The trace unit is not in integration mode.

The trace unit is in integration mode. This mode enables:

  • A debug agent to perform topology detection.
  • SoC test software to perform integration testing.

The TRCITCTRL can be accessed through the external debug interface, offset 0xF00.

Non-ConfidentialPDF file icon PDF versionARM 100241_0001_00_en
Copyright © 2016, 2017 ARM Limited or its affiliates. All rights reserved.