|Home > Programmer's model > ITS control register summary > Peripheral ID2 Register, GITS_PIDR2|
This register returns byte of the peripheral ID. The GITS_PIDR2 register is part of the set of ITS peripheral identification registers.
The GITS_PIDR2 characteristics are:
|Usage constraints||There are no usage constraints.|
|Configurations||Available in all GIC-600 configurations that have one or more ITS blocks.|
|Attributes||See 4.6 ITS control register summary.|
The following figure shows the bit assignments.
The following table shows the bit assignments.
Table 4-42 GITS_PIDR2 bit assignments
Identifies the version of the GIC architecture with which the GIC-600 complies:
|||JEDEC||Indicates that a JEDEC-assigned JEP106 identity code is used.|
|[2:0]||DES_1||Bits[6:4] of the JEP106 identity code. Bits[3:0] of the JEP106 identity code are assigned to GITS_PIDR1.|