|Home > Programmer's model > GICP register summary > Interrupt Configuration Register, GICP_IRQCR|
This register controls the counter interrupts.
The GICP_IRQCR characteristics are:
|Usage constraints||There are no usage constraints.|
|Configurations||Available in all GIC-600 configurations.|
|Attributes||See 4.9 GICP register summary.|
The following figure shows the bit assignments.
The following table shows the bit assignments.
Table 4-72 GICP_IRQCR bit assignments
Returns 0 if an invalid entry is written.
Creates a level-triggered interrupt if it is owned on chip. Otherwise it behaves as a normal message-based SPI.
In a multichip configuration, the SPIID field must only be programmed to an SPI ID that the chip owns. The relevant GICD_CHIPRn register controls the SPI ownership.
Arm® recommends that if these registers are used, then the SPI must not be used for another device either with a wire or as a message-based interrupt.