|Home > Programmer's model > GICT register summary > Error Record Address Register, GICT_ERR<n>ADDR|
This register contains the address and security status of the write. This register is only present for GICT software record 0.
The GICT_ERR<n>ADDR characteristics are:
If GICD_SAC.GICTNS == 0, then only Secure software can access the functions of this register.
Ignores writes if ERR<n>STATUS.AV == 1.
All bits are RAZ/WI if GICT_ERR<n>STATUS.IERR = 0, 12, or 13.
|Configurations||Available in all GIC-600 configurations.|
|Attributes||See 4.8 GICT register summary.|
The following figure shows the bit assignments.
The following table shows the bit assignments.
Table 4-49 GICT_ERR<n>ADDR bit assignments
0 = The address is Secure.
1 = The address is Non-secure.
|[47:0]||PADDR||The error address.|