3.3.190 t_db_train_resp_next

Configures the t_db_train_resp timing parameter for DB-DRAM Training. With DFI4.0 PHY this register is specified to define the cycle delay between DFI read command and when the response is valid on the dfi_db_train_resp. However this register can also be configured in DFI3.1 mode (optional: in absence of dfi_rddata_valid) to define the delay between DFI read command and when the response is valid on the dfi_rddata. This must include the whole round trip time including the board delays, take a look at DFI4.0 spec for details. Access restrictions: RW Can be read from when in ALL states. Can be written to when in ALL states.

The t_db_train_resp_next register characteristics are:

Usage constraints

There are no usage constraints.

Configurations

There is only one DMC configuration.

Attributes
Offset

0x610

Type

Read-write

Reset

0x00000000

Width

32

Non-ConfidentialPDF file icon PDF versionARM 100568_0000_01_en
Copyright © 2016 ARM Limited or its affiliates. All rights reserved.