3.3.430 t_wr_now

Configures the tWR timing parameter. This determines the write recovery time and is used as the delay applied between the issue of a WRITE command and subsequent commands, other than WRITEs, to the same bank. Note: this must take into account CRC timing requirements. Access restrictions: RO Can be read from when in ALL states. Cannot be written to and only updated when in CONFIG, LOW-POWER or PAUSED states.

The t_wr_now register characteristics are:

Usage constraints

There are no usage constraints.

Configurations

There is only one DMC configuration.

Attributes
Offset

0x1244

Type

Read-only

Reset

0x00000005

Width

32

Non-ConfidentialPDF file icon PDF versionARM 100568_0000_01_en
Copyright © 2016 ARM Limited or its affiliates. All rights reserved.