9 CTI Application Channel Set register, CTIAPPSET

The application channel set register allows software to set any channel output. This register can be used by software to generate a channel event in place of a hardware source on a trigger input. In a system where all events are sent as single cycle pulses, this register must not be used. It is only retained for compatibility with older systems and software. The register is implemented before the CTIGATE register so, for the channel event to propagate outside the CTI, it is necessary for the corresponding CTIGATE bit to be 1.

The CTIAPPSET register characteristics are:









The following figure shows the bit assignments.

Figure 9-547 CTIAPPSET register bit assignments
To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.

The following table shows the bit assignments.

Table 9-566 CTIAPPSET register bit assignments

Bits Reset value Name Function
[31:4] 0x0 SBZ

Software should write the field as all 0s.

[3:0] 0b0000 APPSET

Sets the corresponding internal channel flag.


Read: application channel is inactive. Write: has no effect.


Read: application channel is active. Write: sets the channel output.

Non-ConfidentialPDF file icon PDF version100806_0300_00_en
Copyright © 2017, 2018 Arm Limited or its affiliates. All rights reserved.