9 CTI Channel to Trigger 31 Enable register, CTIOUTEN31

This register maps channels in the cross trigger system to trigger outputs. The CTIOUTEN registers are bit maps that allow any channel input to be mapped to the trigger output, including none (0x0) and all (0xF). There is one register per trigger output so it is possible to map any channel input to any combination of trigger outputs.

The CTIOUTEN31 register characteristics are:

Attributes
Offset

0x011C

Type

Read-write

Reset

0x00000000

Width

32

The following figure shows the bit assignments.

Figure 9-557 CTIOUTEN31 register bit assignments
To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.


The following table shows the bit assignments.

Table 9-576 CTIOUTEN31 register bit assignments

Bits Reset value Name Function
[31:4] 0x0 SBZ

Software should write the field as all 0s.

[3:0] 0b0000 TRIGOUTEN

Channel to trigger output mapping.

0

The corresponding channel is ignored by the output trigger31.

1

When an event occurs on the channel corresponding to this bit, generate an event on event_out[31].

Non-ConfidentialPDF file icon PDF version100806_0300_00_en
Copyright © 2017, 2018 Arm Limited or its affiliates. All rights reserved.