9 CTI Interrupt Acknowledge register, CTIINTACK

Software acknowledge for trigger outputs. The CTIINTACK register is a bit map that allows selective clearing of trigger output events. If the SW_HANDSHAKEparameter for a trigger output is set, indicating that the output latches HIGH when an event is sent to that output, then the output remains HIGH until the corresponding INTACK bit is written to a 1. A write of a bit to 0 has no effect. This allows different software threads to be responsible for clearing different trigger outputs without needing to perform a read-modify-write operation to find which bits are set.

The CTIINTACK register characteristics are:









The following figure shows the bit assignments.

Figure 9-546 CTIINTACK register bit assignments
To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.

The following table shows the bit assignments.

Table 9-565 CTIINTACK register bit assignments

Bits Reset value Name Function
[31:0] 0x0 INTACK

Acknowledges the corresponding event_out output.

Non-ConfidentialPDF file icon PDF version100806_0300_00_en
Copyright © 2017, 2018 Arm Limited or its affiliates. All rights reserved.