9 CTI Application Channel Pulse register, CTIAPPPULSE

The application channel pulse register allows software to pulse any channel output. This register can be used by software to pulse a channel event in place of a hardware source on a trigger input. The register is implemented before the CTIGATE register so, for the channel event to propagate outside the CTI, it is necessary for the corresponding CTIGATE bit to be 1.

The CTIAPPPULSE register characteristics are:

Attributes
Offset

0x001C

Type

Write-only

Reset

0x00000000

Width

32

The following figure shows the bit assignments.

Figure 9-549 CTIAPPPULSE register bit assignments
To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.


The following table shows the bit assignments.

Table 9-568 CTIAPPPULSE register bit assignments

Bits Reset value Name Function
[31:4] 0x0 SBZ

Software should write the field as all 0s.

[3:0] 0b0000 APPPULSE

Pulses the channel outputs.

0

No effect.

1

Pulse channel event for one clk cycle.

Non-ConfidentialPDF file icon PDF version100806_0300_00_en
Copyright © 2017, 2018 Arm Limited or its affiliates. All rights reserved.