|Home > Programmers model > css600_cti introduction > Register descriptions > CTI Trigger 2 to Channel Enable register, CTIINEN2|
This register maps trigger inputs to channels in the cross trigger system. The CTIINEN registers are bit maps that allow the trigger input to be mapped to any channel output, including none (
0x0) and all (
0xF). There is one register per trigger input, so it is possible to map any combination of trigger inputs to any channel outputs.
The CTIINEN2 register characteristics are:
The following figure shows the bit assignments.
The following table shows the bit assignments.
Table 9-571 CTIINEN2 register bit assignments
Software should write the field as all 0s.
Trigger input to channel mapping.