|Home > Programmers model > css600_tmc_ets introduction > Register descriptions > Trigger Counter register, TRG|
In Circular Buffer mode, the Trigger Counter register specifies the number of 32-bit words to capture in the trace memory, after detection of either a rising edge on the trigin input or a trigger packet in the incoming trace stream, that is, where atid_s =
0x7D. The value programmed must be aligned to the frame length of 128 bits.
The TRG register characteristics are:
The following figure shows the bit assignments.
The following table shows the bit assignments.
Table 9-427 TRG register bit assignments
Trigger count. This count represents the number of 32-bit words of trace that are captured between a trigger packet and a trigger event. On writes, the value written must be aligned to the frame length of 128 bits.