2.2.1 Setting up the Cycle Model

To use the Cycle Model, obtain an ARM Cycle Model license file from the ARM website by following the instructions provided when you download the Cortex®-M3 DesignStart™ Eval bundle.

By default, the Cycle Model is not used. To use it, you must specify DSM=yes in the simulation make commands, as shown in 2.2.2 Compiling the RTL and 2.2.3 Running the simulation.

Non-ConfidentialPDF file icon PDF versionARM 100895_0000_00_en
Copyright © 2017 ARM Limited or its affiliates. All rights reserved.