11.29 Timed Auto-Refresh Properties dialog box

Use the Timed Auto-Refresh Properties dialog box to modify the update interval settings.

Update Interval

Specifies the auto refresh interval in seconds.

Update When

Specifies when to refresh the view:

Running

Refreshes the view only while the target is running.

Stopped

Refreshes the view only while the target is stopped.

Always

Always refreshes the view.

Note:

When you select Running or Always, the Memory and Screen views are only updated if the target supports access to that memory when running. For example, some CoreSight™ targets support access to physical memory at any time through the Debug Access Port (DAP) to the Advanced High-performance Bus Access Port (AHB-AP) bridge. In those cases, add the AHB: prefix to the address selected in the Memory or Screen views. This type of access bypasses any cache on the CPU core, so the memory content returned might be different to the value that the core reads.
Figure 11-40 Timed Auto-Refresh Properties dialog box
Timed Auto-Refresh properties dialog box


Non-ConfidentialPDF file icon PDF versionARM 100953_0527_00_en
Copyright © 2010–2017 ARM Limited or its affiliates. All rights reserved.