5.4.5 Fastline parameters

This section describes the parameters for the Fastline plug-in.

Each parameter is prefixed with TRACE.st, for example:

TRACE.st.config

Note:

The trace-start-time and trace-end-time parameters apply to every counter. You can also specify a StartTime and EndTime for individual counters in the counter configuration file. If so, the time period in which trace occurs for a counter is the overlap between the two periods specified.

Table 5-6 Fastline parameters

Parameter Description
config

The system configuration file. This JSON file defines which cluster configuration file to use for each cluster.

Mandatory.

counters-config-file

The counter configuration file. This JSON file maps MTI trace sources to Streamline counters and sets the parameters for the capture.

Optional. If omitted, no counters are generated in the capture.

output-directory

Directory for the APC capture that Fastline generates.

Optional. If omitted, the APC is created in the current directory.

apc-capture

Name of the APC capture that Fastline generates.

Optional. If omitted, the name is fastmodels.apc.

trace-start-time

The simulated time in nanoseconds when trace is enabled for Fastline.

Optional. If omitted, the default is zero.

trace-end-time

The simulated time in nanoseconds when trace is disabled for Fastline.

Optional. If omitted, the default is 0xffffffffffffffff.

Non-ConfidentialPDF file icon PDF version100964_1142_00_en
Copyright © 2014–2018 Arm Limited or its affiliates. All rights reserved.