2.1.5 AMBAPVSignalState protocol
This protocol defines two behaviors that permit a master to change the state of signals such as interrupt and to retrieve the state of such signals from slaves. Strictly speaking this behavior is not covered by AMBA3, but is provided with the AMBA-PV components.
export_id, const bool &state): void
- Transfers a signal state. The
must be set to 0 in this context.
tlm::tlm_tag<bool> * t): bool
- Retrieves a signal state. The
export_id parameter must be set to 0, and the
t parameter must be set to
NULL, in this