Fast Models Reference Manual : 3.7.39 VisEventRecorder

Event recorder component for visualisation component (allows to playback and record interactive GUI sessions). This model is written in LISA+.

VisEventRecorder contains the following CADI targets:

VisEventRecorder contains the following MTI components:

Table 3-264 Ports

Name	Protocol	Type	Description
`control`	`VisEventRecorderProtocol`	Slave	The visualisation component controls the recorder through this port.
`ticks`	`InstructionCount`	Slave	Allow VisEventRecorder to get tick count from a core.

Table 3-265 Parameters for VisEventRecorder

Name	Type	Default value	Description
`checkInstructionCount`	`bool`	`0x1`	check instruction count in recording file against actual instruction count during playback
`playbackFileName`	`string`	""	playback filename (empty string disables playback)
`recordingFileName`	`string`	""	recording filename (empty string disables recording)
`recordingTimeBase`	`int`	`0x5f5e100`	timebase in 1/s (relative to the master clock (e.g. 100000000 means 10 nanoseconds resolution simulated time for a 1Hz master clock)) to be used for recording (higher values -> higher time resolution, playback time base is always taken from the playback file)
`verbose`	`int`	`0x0`	enable verbose messages (1=normal, 2=even more)

Non-Confidential	PDF version	100964_1180_00_en
Copyright © 2014–2019 Arm Limited or its affiliates. All rights reserved.