3.7.30 SerialCrossover

Implement an equivalent to a null-modem cable, swapping over serial transmit and receive signals. This model is written in C++.

SerialCrossover - about

This component implements two SerialData slave ports and can connect two SerialData master ports, such as from PL011_Uart components. Data received on one port is buffered in a FIFO until it is read from the other port. Signals received on one port are latched and available to be read by the other port.

Table 3-255 Ports

Name Protocol Type Description
port_a SerialData Slave Slave port for connecting to a SerialData master.
port_b SerialData Slave Slave port for connecting to a SerialData master.
Non-ConfidentialPDF file icon PDF version100964_1180_00_en
Copyright © 2014–2019 Arm Limited or its affiliates. All rights reserved.