|Home > Using Model Debugger > Debug views for registers and memory > Register views|
This section describes the register debug views.
The Register view displays registers and their values and organizes them into multiple groups. A combo box enables switching between the groups that the target model predefines.
For each register, a buffered state of the register (previous value) is stored. To view the contents:
Use the context menu in the Register view and select Show Previous Values.
Place the cursor over the respective register. The buffered state is updated every time the model execution stops.
Right-click one of the registers in the Register view to display the context menu. The menu has the following options:
Copy the contents of the selected register.
Add the selected register to the Watch view.
Insert a breakpoint on the selected register.
Enable the breakpoint at the selected register.
If a breakpoint is present on the selected register, selecting this option displays the Breakpoint properties dialog box.
Edit the contents for the selected register.
Select a memory space and update the Memory view to display the memory contents at the address that the register contents specify.
Update the Memory view to display the memory contents at the address that the register contents specify.
Choose the number base to use to display the register contents. The options are Default Format, Unsigned Decimal, Signed Decimal, Hexadecimal, Binary, Float, or ASCII.
Display the current value and the previous value for the selected register.
Select the registers in the Register view.