2.1.3 Launching Model Debugger separately

You can use Model Debugger to connect to and debug a remote Integrated SIMulator (ISIM) that has a CADI interface.


  1. Launch your ISIM executable with the -S option to start a CADI server.
  2. Launch Model Debugger.
  3. To display the Model Debugger Connect remote dialog box, select File > Connect to Model :
    Figure 2-6 Connect remote dialog box
    Connect remote dialog box

  4. Select the required simulation instance and click Connect.
  5. Select a target, for example the processor, and click Connect to connect to the specific component instance in the simulation.
    Figure 2-7 Select Target dialog box
    Select Target dialog box

    If you select more than one instance, one Model Debugger window opens for each component. Click OK to close the dialog box.

  6. If no application loads, select File > Load Application Code . Select the application image from the Load Application dialog box and click Open.


    If the application loads and the debug information in the application file allows it, Model Debugger displays the source code in the source window.
Non-ConfidentialPDF file icon PDF version100968_1180_00_en
Copyright © 2014–2019 Arm Limited or its affiliates. All rights reserved.