2.3.4 Internal APBCOM

The Internal APBCOM is the internal-side APBCOM component.

This component provides APB access to a duplex COM Wire Interface (CWI) link for low-bandwidth communication. It is used on the internal side and recognized as a CoreSight™ peripheral device by the servicing agent. It has a Power LPI interface to manage power and an IRQ interface to inform the servicing agent that an event occured.

This component uses an APB bus. The following figure shows the port connections:

Figure 2-7 Internal APBCOM
To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.


The Internal APBCOM uses the same address map configuration as the External APBCOM. See 3.2 Control and Status Register Map for sdc600_apbcom_ext for information.

Non-ConfidentialPDF file icon PDF version101130_0002_02_en
Copyright © 2018 Arm Limited or its affiliates. All rights reserved.