1.6.1 Documentation

Each Arm document has an intended audience and is associated with specific tasks in the design flow. These documents do not reproduce Arm architecture and protocol information.

The Arm SDC-600 documentation set is as follows:

Technical Reference Manual

The Technical Reference Manual (TRM) describes the functionality and the effects of functional options on the behavior of the SDC-600. It is required at all stages of the design flow. The choices that are made in the design flow can mean that some behaviors that are described in the TRM are not relevant. If you are programming the SDC-600, then contact the implementer to determine:

  • The build configuration of the implementation.
  • What integration, if any, was performed before implementing the SDC-600.

Configuration and Integration Manual

The Configuration and Integration Manual (CIM) describes:

  • A list of the design-time configuration options.
  • The available build configuration options and related issues in selecting them.
  • How to configure the Register Transfer Level (RTL) model with the build configuration options.
  • How to run test vectors.
  • The processes to sign off the configured design.

Arm® product deliverables include reference scripts and information about using them to implement your design.

The CIM is a confidential document that is only available to licensees.

Non-ConfidentialPDF file icon PDF version101130_0002_02_en
Copyright © 2018 Arm Limited or its affiliates. All rights reserved.