2.3.1 LPC-Q configuration parameters

There are several configuration parameters that determine the functionality of the Low Power Combiner Q-Channel.

The following table shows the LPC-Q configuration parameters.

Table 2-3 LPC-Q configuration parameters

Parameter Possible settings Default Description
NUM_CTRL_Q_CHL 2-32 2 Sets the number of control interfaces, ctrl_, in the LPC-Q.
NUM_DEV_Q_CHL 1-32 1 Sets the number of device interfaces, dev_, in the LPC-Q.
CTRL_Q_CH_SYNC 0, 1 1

0 = Synchronizers are not present on the ctrl<N>_qreqn_i inputs.

1 = Synchronizers are present on the ctrl<N>_qreqn_i inputs.

DEV_Q_CH_SYNC 0, 1 1

0 = Synchronizers are not present on the dev<X>_qacceptn_i or dev<X>_qdeny_i inputs.

1 = Synchronizers are present on the dev<X>_qacceptn_i and dev<X>_qdeny_i inputs.

Non-Confidential - BetaPDF file icon PDF version101150_0000_00_en
Copyright © 2018 Arm Limited (or its affiliates). All rights reserved.