ARM® Glossary



Proprietary Notice

Words and logos marked with ® or ™ are registered trademarks or trademarks of ARM® in the EU and other countries, except as otherwise stated below in this proprietary notice. Other brands and names mentioned herein may be the trademarks of their respective owners.

Neither the whole nor any part of the information contained in, or the product described in, this document may be adapted or reproduced in any material form except with the prior written permission of the copyright holder.

The product described in this document is subject to continuous developments and improvements. All particulars of the product and its use contained in this document are given by ARM in good faith. However, all warranties implied or expressed, including but not limited to implied warranties of merchantability, or fitness for purpose, are excluded.

This document is intended only to assist the reader in the use of the product. ARM shall not be liable for any loss or damage arising from the use of any information in this document, or any error or omission in such information, or any incorrect use of the product.

Where the term ARM is used it means “ARM or any of its subsidiaries as appropriate”.

Confidentiality Status

This document is Non-Confidential. The right to use, copy and disclose this document may be subject to license restrictions in accordance with the terms of the agreement entered into by ARM and the party that ARM delivered this document to.

Product Status

The information in this document is final, that is for a developed product.

Revision History
Revision A26 March 2010New document.
Revision B27 September 2010Second revision. Updated with new terms for the ARM architectures.
Revision C27 January 2011Third revision. Updated with new terms for DS-5.
Revision D24 August 2011Fourth revision. Updated with enhancements.
Revision E17 May 2012Fifth revision. Updated with enhancements.
Revision F06 June 2014Sixth revision. Updated with enhancements and new terms. Internal release only.
Revision G26 January 2015Seventh revision. Updated with enhancements and new terms.
Copyright © 2010-2012, 2014, 2015 ARM Limited. All rights reserved.ARM AEG 0014G
Non-ConfidentialID012615