AN306 Example LogicTile Express 20MG design for a Core Tile Express A9x4

Application Note 306



 

Release information

The following changes have been made to this Application Note.

Change history

Date

Issue

Change

February 14, 2013

A

First release

May 15, 2013

B

Added information for V2F-1XV7 revision C

Proprietary notice

ARM, the ARM Powered logo, Thumb and StrongARM are registered trademarks of ARM Limited.

The ARM logo, AMBA, Angel, ARMulator, EmbeddedICE, ModelGen, Multi-ICE, ARM7TDMI, ARM9TDMI, TDMI and STRONG are trademarks of ARM Limited.

All other products, or services, mentioned herein may be trademarks of their respective owners.

Confidentiality status

This document is Open Access.  This document has no restriction on distribution.

Feedback on this Application Note

If you have any comments on this Application Note, please send email to errata@arm.com giving:

·        the document title

·        the document number

·        the page number(s) to which your comments refer

·        an explanation of your comments.

 

General suggestions for additions and improvements are also welcome.

ARM web address

http://www.arm.com/

1                Introduction

1.1           Purpose of this application note

This application note discusses the operation of an example design for a LogicTile Express 20MG (V2F-1XV7).    It examines the contents of the V2F-1XV7, the system interconnect, the clock structure, and specifics of the programmer’s model directly relevant to V2F-1XV7 operation.

Having read this application note, the user should be in a position to debug and analyze the operation of the provided example design.  He also should be able to make changes to the example design, connect his own     AXI or AHB based masters, and AXI, AHB or APB slaves.

1.2           Overview of hardware platform

Image

Figure 11 V2F-1XV7 and V2P-CA9 daughterboards on a V2M-P1 motherboard

 

The example design is intended to work on a Motherboard Express uATX (V2M-P1) with a CoreTile Express A9x4 (V2P-CA9) mounted on Site 1 and LogicTile Express 20MG (V2F-1XV7) mounted on Site 2.

2                Getting Started

 

The steps below show you how to set up the hardware platform and copy the necessary configuration files to the V2M-P1 motherboard USB Flash disk and program the LogicTile Express FPGA image.

 

1.    Mount the V2P-CA9 daughterboard on site 1 and the V2F-1XV7 daughterboard on site 2 of the     V2M-P1 motherboard as described in:

 

Quick Start Guide for the Versatile Express Family - Adding Daughterboards.

 

2.    Connect USB, UART0, and power cables, and power up the boards as described in:

 

Quick Start Guide for the Versatile Express Family - Powering up the System.

 

3.    After the host computer has recognized the motherboard Micro-SD card as a USB mass storage device, you must copy the application note boardfiles on to the card.  If this application note was obtained from a Versatile Express DVD, the easiest way to copy the boardfiles on to the card is to follow the system recovery procedure given in the release notes supplied with the DVD.

 

If you don’t have the Versatile Express DVD, you must add the boardfiles to the existing contents of your motherboard Micro-SD card by copying the boardfiles/SITE2/HBI0247*/AN306 directories from the application note into the /SITE2/HBI0247* directories on the motherboard Micro-SD card.  For a revision B V2F-1XV7 board, copy the boardfiles/SITE2/HBI0247B/AN306 directory from the application note into /SITE2/HBI0247B on the motherboard Micro-SD card.  For a revision C V2F-1XV7 board, copy the boardfiles/SITE2/HBI0247C/AN306 directory from the application note into /SITE2/HBI0247C on the motherboard Micro-SD card.

 

4.    Edit the board.txt file located in /SITE2/HBI0247B/ or /SITE2/HBI0247C/ on the motherboard Micro-SD card.  You must modify the APPNOTE field in board.txt to comment out the line containing ANxxx and uncomment the line containing AN306.  (Note:  The bitfiles for the revision B and the revision C boards are not identical).

 

For a revision B V2F-1XV7 board, the APPNOTE field should look like this after editing:

 

[APPLICATION NOTE]

;APPNOTE: ANxxx\axxxrxpx.txt   ;Please select the required application note

APPNOTE: AN306\a306r0p1.txt

;APPNOTE: AN307\a307r1p1.txt

 

For a revision C V2F-1XV7 board, the APPNOTE field should look like this after editing:

 

[APPLICATION NOTE]

;APPNOTE: ANxxx\axxxrxpx.txt   ;Please select the required application note

APPNOTE: AN306\a306r1p0.txt

;APPNOTE: AN307\a307r2p0.txt

 

 

5.    Power cycle the boards by pressing the black button and then the red button.  The application note bitfile will be uploaded to the V2F-1XV7 FPGA.

 

6.    The system will now be fully configured and ready for use.

 

 

3                System architecture

This system is an AXI (AMBA 3.0) based system. The example V2F-1XV7 image exposes one muxed 64 bit AXI master port, “External Muxed Slave” (EMS) and one muxed 64 bit AXI slave port, “External Muxed Master” (EMM) to the V2P-CA9 daughterboard.  It also makes connections to the Static Memory Bus, Multimedia Bus, System Bus to the V2M-P1 motherboard.

 

 

Image

Figure 31 Block level architecture

 

Note that the direction of the arrows indicates the direction of control, i.e. it points from the Master to the Slave.  AXI buses contain signals going in both directions.

 

3.1           AN306 architecture

 

Image

 

Figure 32 AN306 Architecture

3.2           Module functionality

The function of each of these blocks is as follows:

NIC301 Bus Matrix

This provides the interconnect structure.  It allows any of the 2 AXI and 1 AHB slave ports to connect to one of the 4 AXI, 1 AHB and 1 APB master ports without blocking the other masters (unless they both try to access the same slave).

It also contains the decoder mapping to determine the address map, and a scheme to determine priority of competing masters to a single slave.

The NIC301 Bus Matrix blocks all accesses to the EMS AXI master port from the EMM AXI slave port.  It prevents AXI transactions loops and reduces the number of EMS AXI master port ID bits.  

See the CoreLink™ Network Interconnect NIC-301 Technical Reference Manual for more information.


 

PL111 CLCD

This is a Color Liquid Crystal Display controller.  The ARM PrimeCell PL111 is used in this design. See the PrimeCell Color LCD Controller (PL111) Technical Reference Manual for more information.

The CLCD signals are connected via MultiMedia Bus (MMB) to a DVI Multiplexor on the V2M-P1 motherboard.  The multiplexer selects the source to supply video to the DVI-I connector as either:

• the MMB bus from the V2P-CA9

• the MMB bus from the application note

• the CLCD controller in the V2M-P1 motherboard.

For information how configure the DVI multiplexor see Motherboard Express μATX V2M-P1 Technical Reference Manual on page 2-15.

 

DxAsyncAxi_V2

This block provides an AXI demux block which demultiplexes the 2:1 muxed 64 bit EMM AXI bus and an asynchronous bridge (BP132) to allow the multiplexed bus to operate in a different clock domain.  It increases the internal operating frequency and introduces minimum three clock cycles of latency.

PL330 DMAC

This is a Direct Memory Access Controller.  The ARM PrimeCell PL330 is used in this design.  For more information please refer to the PrimeCell® DMA Controller (PL330) Technical Reference Manual.

PL354 SMC

This is a Static Memory Controller.  The ARM PrimeCell PL354 is used in this design. See the PrimeCell Static Memory Controller (PL350 series) Technical Reference Manual for more information.

MxAsyncAxi_V2

This block provides an asynchronous bridge (BP132) to allow the multiplexed bus to operate in a different clock domain than the internal system domain.  It also includes an AXI 2:1 mux block which multiplexes the 64 bit External Slave AXI bus. The asynchronous bridge increases the internal operating frequency and introduces a minimum of three clock cycles of latency.

DMC

The DMC (Dynamic Memory Controller) is a Xilinx core instantiated in the design.  The edf is not included and must be regenerated by the user if rebuilding the design.

SCC

This is example of a Serial Configuration Controller (SCC).  The SCC provides a standard serial interface to a V2F-1XV7 Daughterboard Configuration Controller (DCC).  The DCC uses this interface by issuing commands to receive/transmit information from/to the SCC registers in the FPGA.

All DCC defined commands have been supported.  The SCC enables identification and of systems, passes DCM lock status to V2M-P1 motherboard reset controller as well to light the V2F-1XV7 daughterboard LEDs and update an internal register according to the states of the V2F-1XV7 switches.  The SCC also provides two general purpose user registers which value can be uploaded during power up sequence from configuration file.

For more information about DCC interface and commands please refer to LogicTile Express 20MG TRM.

The SCC registers are also accessible via APB bus which allows to access SCC registers via AN306 bus matrix.  For programming model see 5.2 SCC registers.  

 

3.3           Modules revision

 

Module

Revision

NIC301 Bus Matrix

R2p1

PL111 CLCD

r0p2

DxAsynchAxi_V2

r0p0

PL330 DMAC

r0p0

PL354 SMC

r2p1

MxAsynchAxi_V2

r0p0

SCC

r0p0

Table 1 Modules revision in AN306 r1p0

 

3.4           Clock architecture

The clock architecture is carefully designed to minimize the skew (difference) in the clock edge position between different components across the system.  The DCMs and clock loops on V2F-1XV7 have been used to achieve that.

For the maximum and default frequencies of clocks please refer to 8.1 Default, minimum and maximum operating frequencies.

For information how to set up and change OSC0-OSC5 clocks frequency on please refer to Motherboard Express uATX TRM

 

Image

Figure 33 Clock architecture for AN306


 

There are 5 clock domains in this design:

                                    AN306 AXI System Bus

The Example Internal AXI System Bus is clocked by ACLK.  The ACLK is generated through a MMCM from OSC0.  The Internal AXI System Bus clock domain includes:

·        Bus Matrix

·        DMA Controller

·        DMC controller AXI bus

·        CLCD controller AHB buses

·        SMC AXI bus

·        De-multiplexing AXI master bus, multiplexing AXI slave bus

·        APB subsystem

                                    CLCD

CLCDCLK is directly connected to OSC1. It is reference clock for the CLCD controller. The frequency of this clock must be adjusted to match target screen resolution. 

                                    External AXI Slave Bus 

The External AXI Slave Bus is clocked by OSC3.  The clock loop LOOP1 and ExtS_DLL are used to de-skew internal ACLK_ExtS and external EMS_ACLK clocks. 

                                    Static Memory Bus

The SMCLK is used to drive Static Memory Controller and Static Memory bus.  The SMCLK is directly connected to OSC4.  The SMCLKIN feedback clock is used to register data from Static memory bus slave implemented on V2 Motherboard.

                                    External AXI Master Bus 

The External AXI Slave Bus is clocked by EMM_ACLK provided by V2P-CA9 daughterboard.

 

3.5           Interrupt architecture

 

There are 4 interrupts sources generated by AN306 which are connected to V2P-CA9 daughterboard interrupt controller via the V2M-P1 motherboard.  The interrupts signals have been inverted in AN306 top level and V2M-P1 motherboard to provide the correct polarity for the interrupt controller in the Cortex-A9 MPCore test chip on V2P-CA9. 

 

Signal

Source

V2M-P1 int

V2P-CA9 int

Clcdintr

CLCD

SB_INT[0]

INTSOURCE[36]

smc_int

SMC

SB_INT[1]

INTSOURCE[37]

dma_int[0]

DMAC

SB_INT[2]

INTSOURCE[38]

dma_int[1]

DMAC

SB_INT[3]

INTSOURCE[39]

Table 2 Interrupts

 

3.6           Reset architecture

 

The reset signal CB_nRST from the motherboard is synchronized to the correct clock domains to reset all the peripherals in the V2 FPGA Daughterboard.

The reset signal nPLLRESET from the DCC controller is used to reset DCMs during power-up sequence.

The reset signal CB_nPOR is not used in this design.

 

4                Hardware description

4.1           V2F-1XV7  wrapper  (V2F_1XV7_wrapper)

This level defines the mapping from the V2F-1XV7 XN, XP and XS busses into their functional allocations.  The wrapper contains also clock structure and ties off static pins.

4.2           AN306 top level (AN306_toplevel)

This level connects all the Application Note components together.  This includes all the major modules as shown in Figure 3‑2 AN306 Architecture.  The RTL is provided so modules can be added and removed.

Therefore all modules except SCC are or include high value AXI blocks, there are only provided as .NGC netlists.

Two constrain files (xcd) are included.

4.3           AXI multiplexing scheme

DDR registers have been used to implement 2:1 multiplexing and demultiplexing to reduce the pin count for the two AXI buses for implementation on the X header.

The registers are part of the AXI asynchronous bridge logic therefore multiplexing does not introduce any extra latency to the AXI bus.

The xVALID and xREADY signals on AXI are not multiplexed in this way due to their timing requirements and are passed directly between devices.

For multiplexed AXI timing requirements please refer to 8.2 AXI timing requirements.

The multiplexing and demultiplexing blocks are provided as NGC netlist.

 

4.4           Header HDRX pin allocation

 

The two AXI buses connect to the HDRX as shown.  Multiplexed AXI slave bus EMM connects via HDRX header to AXI External Master and multiplexed AXI master bus EMS connects via header HDRX to AXI External Slave.

4.4.1        Multiplexed AXI master bus

 

 

 

 

HDRX pin

X bus

Signal (Hi/Lo)

HDRX pin

X bus

Signal (Hi/Lo)

G1

XN6

EMS_WDATA0/32

D3

XP3

EMS_ WID14/WLAST

G2

XP6

EMS_WDATA1/33

E1

XN4

EMS_WSTRB0/4

H2

XN7

EMS_WDATA2/34

E2

XP4

EMS_WSTRB1/5

H3

XP7

EMS_WDATA3/35

F2

XN5

EMS_WSTRB2/6

J1

XN8

EMS_WDATA4/36

F3

XP5

EMS_WSTRB3/7

J2

XP8

EMS_WDATA5/37

G25

XS6

EMS_WVALID

K2

XN9

EMS_WDATA6/38

K18

XP59

EMS_BRESP1/0

K3

XP9

EMS_WDATA7/39

K25

XS9

EMS_BVALID

A4

XN10

EMS_WDATA8/40

H25

XS7

EMS_WREADY

A5

XP10

EMS_WDATA9/41

A10

XN30

EMS_AWADDR0/16

B5

XN11

EMS_WDATA10/42

A11

XP30

EMS_AWADDR1/17

B6

XP11

EMS_WDATA11/43

B11

XN31

EMS_AWADDR2/18

C4

XN12

EMS_WDATA12/44

B12

XP31

EMS_AWADDR3/19

C5

XP12

EMS_WDATA13/45

C10

XN32

EMS_AWADDR4/20

D5

XN13

EMS_WDATA14/46

C11

XP32

EMS_AWADDR5/21

D6

XP13

EMS_WDATA15/47

D11

XN33

EMS_AWADDR6/22

E4

XN14

EMS_WDATA16/48

D12

XP33

EMS_AWADDR7/23

E5

XP14

EMS_WDATA17/49

E10

XN34

EMS_AWADDR8/24

F5

XN15

EMS_WDATA18/50

E11

XP34

EMS_AWADDR9/25

F6

XP15

EMS_WDATA19/51

F11

XN35

EMS_AWADDR10/26

G4

XN16

EMS_WDATA20/52

F12

XP35

EMS_AWADDR11/27

G5

XP16

EMS_WDATA21/53

G10

XN36

EMS_AWADDR12/28

H5

XN17

EMS_WDATA22/54

G11

XP36

EMS_AWADDR13/29

H6

XP17

EMS_WDATA23/55

H11

XN37

EMS_AWADDR14/30

J4

XN18

EMS_WDATA24/56

H12

XP37

EMS_AWADDR15/31

J5

XP18

EMS_WDATA25/57

G7

XN26

EMS_AWID1/0

K5

XN19

EMS_WDATA26/58

G8

XP26

EMS_AWID3/2

K6

XP19

EMS_WDATA27/59

H8

XN27

EMS_AWID5/4

A7

XN20

EMS_WDATA28/60

H9

XP27

EMS_AWID7/6

A8

XP20

EMS_WDATA29/61

J7

XN28

EMS_AWID9/8

B8

XN21

EMS_WDATA30/62

J8

XP28

EMS_AWID11/10

B9

XP21

EMS_WDATA31/63

K8

XN29

EMS_AWID13/12

A1

XN0

EMS_WID1/0

C8

XP22

EMS_AWPROT2/AWID14

A2

XP0

EMS_WID3/2

F8

XN25

EMS_AWLEN0/2

B2

XN1

EMS_WID5/4

F9

XP25

EMS_AWLEN1/3

B3

XP1

EMS_WID7/6

D9

XP23

EMS_AWSIZE0/1

C1

XN2

EMS_WID9/8

C7

XN22

EMS_AWPROT0/1

C2

XP2

EMS_WID11/10

D8

XN23

EMS_AWBURST0/1

D2

XN3

EMS_WID13/12

K9

XP29

EMS_AWLOCK0/1


 

HDRX pin

X buss

Signal (Hi/Lo)

HDRX pin

X bus

Signal (Hi/Lo)

E7

XN24

EMS_AWCACHE0/2

A19

XN60

EMS_RDATA0/32

E8

XP24

EMS_AWCACHE1/3

A20

XP60

EMS_RDATA1/33

E25

XS4

EMS_AWVALID

B20

XN61

EMS_RDATA2/34

K20

XN69

EMS_BID0/1

B21

XP61

EMS_RDATA3/35

K21

XP69

EMS_BID2/3

C19

XN62

EMS_RDATA4/36

H23

XN77

EMS_BID4/5

C20

XP62

EMS_RDATA5/37

H24

XP77

EMS_BID6/7

D20

XN63

EMS_RDATA6/38

F25

XS5

EMS_AWREADY

D21

XP63

EMS_RDATA7/39

J22

XN78

EMS_BID8/9

E19

XN64

EMS_RDATA8/40

J23

XP78

EMS_BID10/11

E20

XP64

EMS_RDATA9/41

K23

XN79

EMS_BID12/13

F20

XN65

EMS_RDATA10/42

K24

XP79

EMS_BID14/NC

F21

XP65

EMS_RDATA11/43

J25

XS8

EMS_BREADY

G19

XN66

EMS_RDATA12/44

G13

XN46

EMS_ARADDR0/16

G20

XP66

EMS_RDATA13/45

G14

XP46

EMS_ARADDR1/17

H20

XN67

EMS_RDATA14/46

H14

XN47

EMS_ARADDR2/18

H21

XP67

EMS_RDATA15/47

H15

XP47

EMS_ARADDR3/19

J19

XN68

EMS_RDATA16/48

J13

XN48

EMS_ARADDR4/20

J20

XP68

EMS_RDATA17/49

J14

XP48

EMS_ARADDR5/21

A22

XN70

EMS_RDATA18/50

A16

XN50

EMS_ARADDR6/22

A23

XP70

EMS_RDATA19/51

A17

XP50

EMS_ARADDR7/23

B23

XN71

EMS_RDATA20/52

B17

XN51

EMS_ARADDR8/24

B24

XP71

EMS_RDATA21/53

B18

XP51

EMS_ARADDR9/25

C22

XN72

EMS_RDATA22/54

C16

XN52

EMS_ARADDR10/26

C23

XP72

EMS_RDATA23/55

C17

XP52

EMS_ARADDR11/27

D23

XN73

EMS_RDATA24/56

D17

XN53

EMS_ARADDR12/28

D24

XP73

EMS_RDATA25/57

D18

XP53

EMS_ARADDR13/29

E22

XN74

EMS_RDATA26/58

E16

XN54

EMS_ARADDR14/30

E23

XP74

EMS_RDATA27/59

E17

XP54

EMS_ARADDR15/31

F23

XN75

EMS_RDATA28/60

C13

XN42

EMS_ARID1/0

F24

XP75

EMS_RDATA29/61

C14

XP42

EMS_ARID3/2

G22

XN76

EMS_RDATA30/62

D14

XN43

EMS_ARID5/4

G23

XP76

EMS_RDATA31/63

D15

XP43

EMS_ARID7/6

G16

XN56

EMS_RID0/1

E13

XN44

EMS_ARID9/8

G17

XP56

EMS_RID2/3

E14

XP44

EMS_ARID11/10

H17

XN57

EMS_RID4/5

F14

XN45

EMS_ARID13/12

H18

XP57

EMS_RID6/7

J11

XP38

EMS_ARPROT2/ARID14

J16

XN58

EMS_RID8/9

B14

XN41

EMS_ARLEN0/2

J17

XP58

EMS_RID10/11

B15

XP41

EMS_ARLEN1/3

K17

XN59

EMS_RID12/13

K12

XP39

EMS_ARSIZE0/1

F18

XP55

RID14/EMS_RLAST

J10

XN38

EMS_ARPROT0/1

F17

XN55

EMS_RRESP1/0

K11

XN39

EMS_ARBURST0/1

B25

XS1

EMS_RVALID

F15

XP45

EMS_ARLOCK0/1

A25

XS0

EMS_RREADY

A13

XN40

EMS_ARCACHE0/2

K14

XN49

1’b1

A14

XP40

EMS_ARCACHE1/3

K15

XP49

EMS_ACLK

D25

XS3

EMS_ARVALID

 

 

 

C25

XS2

EMS_ARREADY

 

 

 

Table 3 Header HRDX EMS bus pin allocation


 

4.4.2        Multiplexed AXI slave bus

 

 

 

HDRX pin

X bus

Signal (Hi/Lo)

X bus

FPGA IO

Signal (Hi/Lo)

D50

XN153

EMM_WDATA0/32

E48

XP154

EMM_WSTRB3/7

D49

XP153

EMM_WDATA1/33

D26

XS13

EMM_WVALID

C49

XN152

EMM_WDATA2/34

C26

XS12

EMM_WREADY

C48

XP152

EMM_WDATA3/35

K41

XN129

EMM_AWADDR0/16

B50

XN151

EMM_WDATA4/36

K40

XP129

EMM_AWADDR1/17

B49

XP151

EMM_WDATA5/37

J40

XN128

EMM_AWADDR2/18

A49

XN150

EMM_WDATA6/38

J39

XP128

EMM_AWADDR3/19

A48

XP150

EMM_WDATA7/39

H41

XN127

EMM_AWADDR4/20

K47

XN149

EMM_WDATA8/40

H40

XP127

EMM_AWADDR5/21

K46

XP149

EMM_WDATA9/41

G40

XN126

EMM_AWADDR6/22

J46

XN148

EMM_WDATA10/42

G39

XP126

EMM_AWADDR7/23

J45

XP148

EMM_WDATA11/43

F41

XN125

EMM_AWADDR8/24

H47

XN147

EMM_WDATA12/44

F40

XP125

EMM_AWADDR9/25

H46

XP147

EMM_WDATA13/45

E40

XN124

EMM_AWADDR10/26

G46

XN146

EMM_WDATA14/46

E39

XP124

EMM_AWADDR11/27

G45

XP146

EMM_WDATA15/47

D41

XN123

EMM_AWADDR12/28

F47

XN145

EMM_WDATA16/48

D40

XP123

EMM_AWADDR13/29

F46

XP145

EMM_WDATA17/49

C40

XN122

EMM_AWADDR14/30

E46

XN144

EMM_WDATA18/50

C39

XP122

EMM_AWADDR15/31

E45

XP144

EMM_WDATA19/51

D44

XN133

EMM_AWID1/0

D47

XN143

EMM_WDATA20/52

D43

XP133

EMM_AWID3/2

D46

XP143

EMM_WDATA21/53

C43

XN132

EMM_AWID5/4

C46

XN142

EMM_WDATA22/54

C42

XP132

EMM_AWID7/6

C45

XP142

EMM_WDATA23/55

B44

XN131

EMM_AWID9/8

B47

XN141

EMM_WDATA24/56

B43

XP131

EMM_AWID11/10

B46

XP141

EMM_WDATA25/57

A43

XN130

EMM_AWID13/12

A46

XN140

EMM_WDATA26/58

H43

XP137

EMM_AWPROT2/AWID14

A45

XP140

EMM_WDATA27/59

E43

XN134

EMM_AWLEN0/2

K44

XN139

EMM_WDATA28/60

E42

XP134

EMM_AWLEN1/3

K43

XP139

EMM_WDATA29/61

G42

XP136

EMM_AWSIZE0/1

J43

XN138

EMM_WDATA30/62

H44

XN137

EMM_AWPROT0/1

J42

XP138

EMM_WDATA31/63

G43

XN136

EMM_AWBURST0/1

K50

XN159

EMM_WID1/0

A42

XP130

EMM_AWLOCK0/1

K49

XP159

EMM_WID3/2

F44

XN135

EMM_AWCACHE0/2

J49

XN158

EMM_WID5/4

F43

XP135

EMM_AWCACHE1/3

J48

XP158

EMM_WID7/6

F26

XS15

EMM_AWVALID

H50

XN157

EMM_WID9/8

E26

XS14

EMM_AWREADY

H49

XP157

EMM_WID11/10

A31

XN90

EMM_BID0/1

G49

XN156

EMM_WID13/12

A30

XP90

EMM_BID2/3

G48

XP156

WID14/EMM_WLAST

C28

XN82

EMM_BID4/5

F50

XN155

EMM_WSTRB0/4

C27

XP82

EMM_BID6/7

F49

XP155

EMM_WSTRB1/5

B29

XN81

EMM_BID8/9

E49

XN154

EMM_WSTRB2/6

B28

XP81

EMM_BID10/11


 

HDRX pin

X bus

Signal (Hi/Lo)

X bus

FPGA IO

Signal (Hi/Lo)

A28

XN80

EMM_BID12/13

F32

XN95

EMM_RDATA8/40

A27

XP80

EMM_BID14/1’b0

F31

XP95

EMM_RDATA9/41

A33

XP100

EMM_BRESP1/0

E31

XN94

EMM_RDATA10/42

A26

XS10

EMM_BVALID

E30

XP94

EMM_RDATA11/43

B26

XS11

EMM_BREADY

D32

XN93

EMM_RDATA12/44

D38

XN113

EMM_ARADDR0/16

D31

XP93

EMM_RDATA13/45

D37

XP113

EMM_ARADDR1/17

C31

XN92

EMM_RDATA14/46

C37

XN112

EMM_ARADDR2/18

C30

XP92

EMM_RDATA15/47

C36

XP112

EMM_ARADDR3/19

B32

XN91

EMM_RDATA16/48

B38

XN111

EMM_ARADDR4/20

B31

XP91

EMM_RDATA17/49

B37

XP111

EMM_ARADDR5/21

K29

XN89

EMM_RDATA18/50

K35

XN109

EMM_ARADDR6/22

K28

XP89

EMM_RDATA19/51

K34

XP109

EMM_ARADDR7/23

J28

XN88

EMM_RDATA20/52

J34

XN108

EMM_ARADDR8/24

J27

XP88

EMM_RDATA21/53

J33

XP108

EMM_ARADDR9/25

H29

XN87

EMM_RDATA22/54

H35

XN107

EMM_ARADDR10/26

H28

XP87

EMM_RDATA23/55

H34

XP107

EMM_ARADDR11/27

G28

XN86

EMM_RDATA24/56

G34

XN106

EMM_ARADDR12/28

G27

XP86

EMM_RDATA25/57

G33

XP106

EMM_ARADDR13/29

F29

XN85

EMM_RDATA26/58

F35

XN105

EMM_ARADDR14/30

F28

XP85

EMM_RDATA27/59

F34

XP105

EMM_ARADDR15/31

E28

XN84

EMM_RDATA28/60

H38

XN117

EMM_ARID1/0

E27

XP84

EMM_RDATA29/61

H37

XP117

EMM_ARID3/2

D29

XN83

EMM_RDATA30/62

G37

XN116

EMM_ARID5/4

D28

XP83

EMM_RDATA31/63

G36

XP116

EMM_ARID7/6

D35

XN103

EMM_RID0/1

F38

XN115

EMM_ARID9/8

D34

XP103

EMM_RID2/3

F37

XP115

EMM_ARID11/10

C34

XN102

EMM_RID4/5

E37

XN114

EMM_ARID13/12

C33

XP102

EMM_RID6/7

B40

XP121

EMM_ARPROT2/ARID14

B35

XN101

EMM_RID8/9

J37

XN118

EMM_ARLEN0/2

B34

XP101

EMM_RID10/11

J36

XP118

EMM_ARLEN1/3

A34

XN100

EMM_RID12/13

A39

XP120

EMM_ARSIZE0/1

E33

XP104

EMM_RID14/RLAST

B41

XN121

EMM_ARPROT0/1

E34

XN104

EMM_RRESP1/0

A40

XN120

EMM_ARBURST0/1

J26

XS18

EMM_RVALID

E36

XP114

EMM_ARLOCK0/1

K26

XS19

EMM_RREADY

K38

XN119

EMM_ARCACHE0/2

A37

XN110

NC

K37

XP119

EMM_ARCACHE1/3

A36

XP110

EMM_ACLK

G26

XS16

EMM_ARVALID

 

 

 

H26

XS17

EMM_ARREADY

 

 

 

K32

XN99

EMM_RDATA0/32

 

 

 

K31

XP99

EMM_RDATA1/33

 

 

 

J31

XN98

EMM_RDATA2/34

 

 

 

J30

XP98

EMM_RDATA3/35

 

 

 

H32

XN97

EMM_RDATA4/36

 

 

 

H31

XP97

EMM_RDATA5/37

 

 

 

G31

XN96

EMM_RDATA6/38

 

 

 

G30

XP96

EMM_RDATA7/39

 

 

 

Table 4 Header HRDX EMM bus pin allocation

4.5           Header HDRY pin allocation

 

4.5.1        Multimedia bus

 

HDRY pin

MMB bus

CLCD Signal

HDRY pin

MMB bus

CLCD Signal

A46

MMB_DATA0

CLD0

J45

MMB_DATA18

CLD18

B46

MMB_DATA1

CLD1

K45

MMB_DATA19

CLD19

C46

MMB_DATA2

CLD2

A43

MMB_DATA20

CLD20

D46

MMB_DATA3

CLD3

B43

MMB_DATA21

CLD21

E46

MMB_DATA4

CLD4

C43

MMB_DATA22

CLD22

F46

MMB_DATA5

CLD5

D43

MMB_DATA23

CLD23

G46

MMB_DATA6

CLD6

G43

MMB_DE

CLAC

H46

MMB_DATA7

CLD7

E43

MMB_HS

CLLP

J46

MMB_DATA8

CLD8

K43

MMB_IDCLK

CLCP

K46

MMB_DATA9

CLD9

F43

MMB_VS

CLFP

A45

MMB_DATA10

CLD10

 

 

 

B45

MMB_DATA11

CLD11

 

 

 

C45

MMB_DATA12

CLD12

 

 

 

D45

MMB_DATA13

CLD13

 

 

 

E45

MMB_DATA14

CLD14

 

 

 

F45

MMB_DATA15

CLD15

 

 

 

G45

MMB_DATA16

CLD16

 

 

 

H45

MMB_DATA17

CLD17

 

 

 

Table 5  Multimedia bus pin allocation

4.5.2        Static memory bus

 

 

HDRY pin

SMB bus

SMC Signal

HDRY pin

SMB bus

SMC Signal

C26

SMB_ADDR0

add_0

B29

SMB_DATA11

data_11

D26

SMB_ADDR1

add_1

C29

SMB_DATA12

data_12

E26

SMB_ADDR2

add_2

D29

SMB_DATA13

data_13

F26

SMB_ADDR3

add_3

E29

SMB_DATA14

data_14

G26

SMB_ADDR4

add_4

F29

SMB_DATA15

data_15

H26

SMB_ADDR5

add_5

G29

SMB_DATA16

data_16

J26

SMB_ADDR6

add_6

H29

SMB_DATA17

data_17

K26

SMB_ADDR7

add_7

J29

SMB_DATA18

data_18

A24

SMB_ADDR8

add_8

K29

SMB_DATA19

data_19

B24

SMB_ADDR9

add_9

A27

SMB_DATA20

data_20

C24

SMB_ADDR10

add_10

B27

SMB_DATA21

data_21

D24

SMB_ADDR11

add_11

C27

SMB_DATA22

data_22

E24

SMB_ADDR12

add_12

D27

SMB_DATA23

data_23

F24

SMB_ADDR13

add_13

E27

SMB_DATA24

data_24

G24

SMB_ADDR14

add_14

F27

SMB_DATA25

data_25

H24

SMB_ADDR15

add_15

G27

SMB_DATA26

data_26

J24

SMB_ADDR16

add_16

H27

SMB_DATA27

data_27

K24

SMB_ADDR17

add_17

J27

SMB_DATA28

data_28

A23

SMB_ADDR18

add_18

K27

SMB_DATA29

data_29


 

SMB bus

SMB bus

SMB bus

SMB bus

SMB bus

SMB bus

B23

SMB_ADDR19

add_19

A26

SMB_DATA30

data_30

C23

SMB_ADDR20

add_20

B26

SMB_DATA31

data_31

D23

SMB_ADDR21

add_21

F20

SMB_nADV

adv_n

E23

SMB_ADDR22

add_22

G20

SMB_nBAA

baa_n

F23

SMB_ADDR23

add_23

K23

SMB_nBLS0

bls_n_0

G23

SMB_ADDR24

add_24

A21

SMB_nBLS1

bls_n_1

H23

SMB_ADDR25

add_25

B21

SMB_nBLS2

bls_n_2

J23

SMB_ADDR26

add_26

C21

SMB_nBLS3

bls_n_3

A19

SMB_ALEN

1'b0

C19

SMB_nCEN

1'b1

B19

SMB_CLEN

1'b0

E21

SMB_nCS0

1'b1

K21

SMB_CLKI

fbclk_in_0

F21

SMB_nCS1

1'b1

K19

SMB_CLKO

SMCLK

G21

SMB_nCS2

1'b1

H20

SMB_CRE

cre

H21

SMB_nCS3

cs_n_1

A30

SMB_DATA0

data_0

J21

SMB_nCS4

1'b1

B30

SMB_DATA1

data_1

A20

SMB_nCS5

1'b1

C30

SMB_DATA2

data_2

B20

SMB_nCS6

1'b1

D30

SMB_DATA3

data_3

C20

SMB_nCS7

cs_n_0

E30

SMB_DATA4

data_4

D20

SMB_nOE

oe_n

F30

SMB_DATA5

data_5

D19

SMB_nREN

1'b1

G30

SMB_DATA6

data_6

F19

SMB_nREQ

1'b0

H30

SMB_DATA7

data_7

E20

SMB_nWAIT

Wait

J30

SMB_DATA8

data_8

D21

SMB_nWE

we_n

K30

SMB_DATA9

data_9

E19

SMB_nWEN

1'b1

A29

SMB_DATA10

data_10

 

 

 

 

Table 6  Static Memory bus pin allocation

4.5.3        Interrupts

 

 

 

HDRY pin

SB bus

Signal

J11

SB_INT0

clcdint

K11

SB_INT1

smc_int

A10

SB_INT2

dma_int_0

B10

SB_INT3

dma_int_1

 

Table 7  Interrupts outputs pin allocation

 

5                Programmer’s model

 

The example design for a V2F-20MG provides

·        SCC memory mapped registers,

·        DMC SDRAM,

·        Static memory bus (SMB) to V2M-P1 motherboard

·        Multimedia bus (MMB) to V2M-P1 motherboard

·        AXI master bus to V2P-CA9 daughterboard slave port.

·        Note that the AXI master from V2P-CA9 cannot access the V2P-CA9 slave port via the V2F-1XV7.  Only the DMA and CLCD controllers in the V2F-1XV7 can access the V2P-CA9 slave port.

5.1           Example AXI memory map

 

Memory Start

Memory End

Size

Bus

AN306

0x0000_0000

0x03FF_FFFF

64MB

dmc

DMC

0x0400_0000

0xDFFF_FFFF

3520MB

ext_s

AXI External Slave

0xE000_0000

0xE00F_FFFF

1MB

APB

SCC registers

0xE010_0000

0xE01F_FFFF

1MB

APB

NIC301

0xE020_0000

0xE02F_FFFF

1MB

APB

PL352

0xE030_0000

0xE03F_FFFF

1MB

APB

PL330

0xE040_0000

0xE04F_FFFF

1MB

APB

DDR3 SPD EEPROM

0xE050_0000

0xE05F_FFFF

1MB

-

Reserved

0xE060_0000

0xE0FF_FFFF

10MB

-

Reserved

0xE100_0000

0xE10F_FFFF

1MB

clcd_s

CLCD controller

0xE110_0000

0xE1FF_FFFF

15MB

-

Reserved

0xE200_0000

0xE2FF_FFFF

16MB

spare_s

SPARE SLAVE

0xE300_0000

0xE3FF_FFFF

16MB

sram

SRAM

0xE400_0000

0xE41F_FFFF

2MB

smb

Motherboard VRAM (2MB aliased)

0xE420_0000

0xE42F_FFFF

1MB

smb

Motherboard Ethernet (1MB aliased)

0xE430_0000

0xE43F_FFFF

1MB

smb

Motherboard USB (1MB aliased)

0xE440_0000

0xE7FF_FFFF

60MB

smb

Motherboard VRAM (4MB aliased)

0xE800_0000

0xEBFF_FFFF

64MB

smb

Motherboard Peripherals

0xEC00_0000

0xEFFF_FFFF

64MB

-

Reserved

0xF000_0000

0xFFFF_FFFF

256MB

dmc

DMC

Table 8 Memory map

5.2           SCC registers

Table 4-3.1 shows the location of the SCC registers in the example design. The addresses shown are on APB bus offsets from the SCC base address 0xE000_0000.

Offset address

Name

Reset value

SIF Type

APB Type

Size

Function

0x000

SCC_USER0

0xXXXXXXXX

R/W

R/W

32

R/W register

0x004

SCC_USER1

0xXXXXXXXX

R/W

R/W

32

R/W register

0x100

SCC_DLLLOCK

0xFFXX000X

R/W

R

32

DLL locked

0x104

SCC_LED

0x0000000F

R

R/W

8

User LEDs control register

0x108

SCC_SW

0x000000XX

R/W

R

8

User Switches register

0xFF8

SCC_AID

0xXXXX0302

R/W

R

32

Auxiliary ID

0xFFC

SCC_ID

0x41X0306X

R/W

R

32

System ID

Table 9 Serial Configuration Control registers

5.2.1        SCC_USERx registers

The registers SCC_USER0 and SCC_USER1 (at offset 0x000-0x004) are general purpose user registers initialized during power up sequence by values from daughter board configuration file. In existing AN306 build these registers can be used for any purpose by software.

Bits

Name

Access

Function

Default

[31:0]

SCC_USERx[31:0]

Read/write

General purpose registers configured during power up from configuration file

hXXXXXXXX

Table 10 SCCCTRL_CFGx bit pattern

5.2.2        DLL lock register

The lock register SCC_DLLLOCK (at offset 0x100) indicated if all DLLs in system have been locked.

Bits

Name

Access

Function

Default

[31:24]

DLL LOCK MASK[7:0]

Read

These bits indicate if the DLL locked is masked.

8’b11111111

[23:16]

DLL LOCK[7:0]

Read

These bits indicate if the DLLs are locked or unlocked:

b0 = unlocked

b1 = locked

8’b111xxxxx

[15:1]

Reserved

Reserved

Reserved

15’b0

[0]

LOCKED

Read

This bit indicates if all enabled DLLs are locked:

b0 = unlocked

b1 = locked

1’bx

Table 11 SCC_DLLLOCK bit pattern

 

5.2.3        User LEDs control register

 

The SCC_LED register (at offset 0x104) controls the 8 of user LEDs on the V2F-1XV7 daughterboard.

Writing the value b11111111 will light all 8 LED’s. LED’s can be lit individually for example writing b00000011 will light only the LED0 and LED1.

 

Bits

Name

Access

Function

Default

[31:8]

Reserved

Read

Reserved

hXXXXXX

[7:0]

LED[7:0]

Read/Write

These bits control LEDs 

h0f

Table 12 SCC_LED bit pattern

 

5.2.4        User switches register

 

The SCC_SW register (at offset 0x108) indicates state of the 8 of user switches on the V2F-1XV7 daughterboard.

 

Bits

Name

Access

Function

Default

[31:8]

Reserved

Read

Reserved

hXXXXXX

[7:0]

SW[7:0]

Read

These bits indicate state of user switches 

hXX

Table 13 SCC_SW bit pattern

5.2.5        SCC_AID register

The SCC_AID register (at offset 0xff8) includes the 16-bit SCC registers description.

Bits

Name

Access

Function

Default

[31:24]

Build

Read

FPGA build number

hXX

[23:16]

Reserved

Read

Reserved

hXX

[15:11]

Reserved

Read

Reserved

5’b00000

[10]

SWREGP

Read

These bits indicate if SCC_SW register have been implemented

1’b1

[9]

LEDREGP

Read

These bits indicate if SCC_LED register have been implemented

1’b1

[8]

DLLREGP

Read

These bits indicate if DLL lock register have been implemented

1’b1

[7:0]

USERREGN

Read

These bits indicate number of SCC_USERx register

h02

Table 14 SCC_AID bit pattern

 

5.2.6        SCC_ID registers

The SCC_ID register (at offset 0xffc) includes the 32-bit AN identification.

 

Bits

Name

Access

Function

Default

[31:24]

Implementor

Read

Implementor ID

h41

[23:20]

Variant

Read

Variant

Number

hX

[19:16]

Architecture

Read

Architecture. Have to be 0x0 for Application Notes.

h00

[15:4]

AN

Read

Application Note number

h306

[3:0]

Revision

Read

Revision number

hX

Table 15 SCC_ID bit pattern

5.3           Reserved and undefined memory

If reserved memory is accessed, it will be caught by the AXI bus matrix and return a decode error (‘DECERR’) which generates a data abort.  The only exception to this is the APB subsystem, which has 13 spare PSEL signals for expansion.  If this address range is accessed the AXIToAPB bridge will return an ‘OKAY’ response.

 

6                RTL

Only the top level and SCC RTL files are included. AXI components are supplied as netlists. However Amba Designer XML configuration files are provided for that components to allow rebuild them. 

Example files are provided to allow building the system with Xilinx Vivado tools.

6.1           Directory structure

Image

The application note has directories. These are:

·        boardfiles: The files are required to program the design into a V2F-1XV7.

·        docs : Related documents including this document.

·        logical : All the verilog RTL for this design.

·        physical : Synthesis and place and route (P&R) scripts and builds for target board.

·        software : ARM code to run on the AN306 application note.

6.2           Logical

The logical directory contains all the verilog supplied with this application note. It contains also Amba Designer XML configuration files which can be used to regenerate verilog for ARM PrimeCell used in the example design.  

The top level for this system is in V2F_1XV7_wrapper.

6.3           Physical

The physical directory contains pre-synthesised components. The function of each block is shown earlier in 3.2 Module functionality.

Each PrimeCell or other large IP block has its own directory (for example pl111_clcd_r0p2).

 

The physical directory contains the scripts for the tools used in the build process.

For tool revision used to build App Note please refer to /docs/readme.txt file.


6.4           Building the App Note using Unix

The Xilinx DDR controller is not supplied and needs to be rebuilt if modifications are made to the design. For V2F-1XV7 revision C, the DDR controller can be rebuilt from the IP catalog in Vivado 2012.04.  For V2F-1XV7 revision B, please contact ARM support for assistance with rebuilding the DDR controller.

The following table details the settings required by CoreGen.

Refer to the run_vivado_201n.m.tcl[1] script in AN306/physical/an306_toplevel/xilinx_revx/scripts[2] directory for the path to the .edf.

DDR controller for revision C board  -  Vivado 2012.04 (MIG 1.8)

CORE Generator Options:

 

   Target Device

xc7v2000t-flg1925

   Speed Grade

-1

   HDL

verilog

   Synthesis Tool

VIVADO

MIG Output Options:

 

   Module Name

mig_7series_v1_8_a_0

   No of Controllers

1

FPGA Options:

 

   System Clock Type

Single-Ended

   Reference Clock Type

Differential

   Debug Port

OFF

   Internal Vref

disabled

   IO Power Reduction

ON

  XADC instantiation in MIG      

Enabled

Extended FPGA Options:

 

   DCI for DQ,DQS/DQS#,DM

enabled

   Internal Termination (HR Banks)

50 Ohms

Controller Options

 

   Memory

DDR3_SDRAM

   Interface

AXI

   Design Clock Frequency

2500 ps (400.0 MHz)

   Phy to Controller Clock Ratio

4:1

   Input Clock Period

10000 ps

   VCC_AUX IO

1.8V

   Memory Type

SODIMMs

   Memory Part

MT8KTF51264HZ-1G6

   Memory Voltage

1.5V

   Data Width

128

   ECC

Disabled

   Data Mask

Enabled

   ORDERING

Strict


 

Memory Options:

 

   Burst Length (MR0[1:0])

8 - Fixed

   Read Burst Type (MR0[3])

Sequential

   CAS Latency (MR0[6:4])

7

   Output Drive Strength (MR1[5,1])

RZQ/7

   Rtt_NOM - ODT (MR1[9,6,2])

RZQ/4

   Rtt_WR - Dynamic ODT (MR2[10:9])

Dynamic ODT off

   Memory Address Mapping

BANK_ROW_COLUMN

Bank Selections:

 

   Reference_Clock:

 

SignalName: clk_ref_p/n

PadLocation: AT15/AU15(CC_P/N)  Bank: 32

   System_Clock:

 

SignalName: sys_clk_i

PadLocation: AU12/(MRCC_P)  Bank: 31

 

 

   System_Control:

 

 SignalName: sys_rst

PadLocation: No connect

 SignalName: init_calib_complete

PadLocation: No connect

 SignalName: tg_compare_error

PadLocation: No connect

Table 16 Xilinx DDR Coregen settings

 

 

To build the App Note using Unix run the make_vivado.scr batch file in the following directory: /physical/an306_toplevel/xilinx_revx/scripts[3] .

This synthesizes the design and runs place and route on the design pulling in pre synthesized components.

A programmable bit file is generated under /physical/an306_toplevel/xilinx_revx/netlist1 and copied to boardfiles/SITE2/HBI0247x/AN3061 as a306ryp0.bit[4].

 

6.5           Using the new bitfile

 

To use the new a306ryp0.bitbitfile, the file must be copied to the SITE2/HBI0247x/AN3061 on V2M-P1 USB Flash drive directory.

The board.txt text file located at /SITE2/HBI0247x/1 in V2M-P1 USB Flash disk have to be edited and APPNOTE field must be modified to AN306\a306ryp0.txt2.

 

 

7                Example software

Example software (AN306_test) is provided to verify the example design and the         V2F-1XV7 daughterboard hardware.

C and assembly language source files are included.

After the Versatile Express system is configured you can upload and execute the example software using a debugger connected to the V2P-CA9 processor board.

 

The example code communicates with the user via the debugger’s console window. It operates as follows:

 

1.      Reads the identification register to ensure that the software is being executed on the correct system.

2.      Initialises SMC.

3.      Detects presence of DDR3 SODIMM (serial presence-detect (SPD) EEPROM).

4.      Tests the FPGA SRAM for sequential write/read and random write/read for word,  half-word and byte accesses.

5.      Tests the Static Memory bus by writing reading to V2M-P1 Motherboard VRAM.

6.      Tests the DDR3 SDRAM for sequential write/read and random write/read for word, half-word and byte accesses.

7.      Tests the DMA controller, AXI bus to External slave, and interrupt signal from DMA.

8.      Tests the CLCD and Multimedia Bus.

 

Note that to test VGA, a DVI-D or HDMI monitor which supports VGA resolution must be connected to the V2M-P1 DVI-I connector.

 

 

8                 I/O Timing Requirements

All of these specific timing requirements refer to the r0p0 revision of the AN306. All units are in nano-seconds “ns” and have been rounded to a worst case value.

Signals with setup, hold and clock to data values are bidirectional signals or have been grouped by function in the table.

8.1           Default, minimum and maximum operating frequencies

 

 

Clock source

Clock signal

Clock domain

Default Freq

Min Freq

Max Freq

 

OSC0

ACLK

AN306 AXI System Bus

80MHz

30MHz

100MHz

 

OSC1

CLCDCLK

CLCD

23.75MHz

2MHz

62.5MHz

OSC2  (rev B)

DDRSYSCLK

DDR System clock

77.6MHz

77.6MHz

77.6MHz

 

OSC2  (rev C)

DDRSYSCLK

DDR System clock

100MHz

100MHz

100MHz

 

 

OSC3

ACLK_ExtS/EMS_ACLK

Ext AXI Slave Bus 

33MHz

25MHz

33MHz

 

OSC4

SMCLK/SMCLKIN

Static Memory Bus

40MHz

32MHz

50MHz

 

OSC6

DDR REF CLK

DDR REF clock

200MHz

200MHz

200MHz

 

 

EMM_ACLK

ACLK_ExtM

Ext AXI Master Bus 

-

33MHz

33MHz

Table 17 Default and maximum operating frequencies

 

 

8.2           AXI timing requirements

Image

Figure 81 AXI timing requirements

Dir

Name

Description

Value

Inputs

tmis [ns]

Max multiplexed inputs setup to clock

1.1

tmih [ns]

Max multiplexed inputs hold to clock

3.8

tis [ns]

Max non multiplexed inputs setup to clock

12.1

tih [ns]

Max non multiplexed input hold to clock

3.8

Outputs

tmov [ns]

Max clock to multiplexed data valid

11.8

tmoh [ns]

Min clock to multiplexed data invalid

3.1

tov [ns]

Max clock to non multiplexed outputs valid

17.7

toh [ns]

Min clock to non multiplexed outputs invalid

3.7

Table 18 AXI Slave Input/Output timing to EMM_ACLK clock input


 

Dir

Name

Description

Value

Inputs

tmis [ns]

Max multiplexed inputs setup to clock

-1.1

tmih [ns]

Max multiplexed inputs hold to clock

5.1

tis [ns]

Max non multiplexed inputs setup to clock

13.9

tih [ns]

Max non multiplexed input hold to clock

4.7

Outputs

tmov [ns]

Max clock to multiplexed data valid

11.5

tmoh [ns]

Min clock to multiplexed data invalid

3

tov [ns]

Max clock to non multiplexed outputs valid

26.5

toh [ns]

Min clock to non multiplexed outputs invalid

5.2

Table 19 AXI Master Input/Output timing to EMS_ACLK clock output

8.3           MMB signals timing.

Image

Figure 82 MMB Outputs Timing

 

Dir

Name

Description

Value

Outputs

tov [ns]

Max rising edge of MMB_IDCLK to data valid

6

toh [ns]

Min rising edge of MMB_IDCLK to data invalid

-2

Table 20 MMB Output timing

 

8.4           SMB signals timing.

 

Image

Figure 83 SMB Inputs and Outputs Timing

 

Dir

Name

Description

Value

Inputs

tis [ns]

Max inputs setup to rising edge of SMCLKIN

7

tih [ns]

Max inputs hold to rising edge of SMCLKIN

12.5

Outputs

tov [ns]

Max rising edge of SMCLKOUT to data valid

21

toh [ns]

Min rising edge of SMCLKOUT to data invalid

2

Table 21 SMB Input/Output timing



[1] Where n.m is Xilinx Vivado version and  revision.

[2] Where x is the V2F-1XV7 daughterboard revision.

 

1 Where x is the V2F-1XV7 daughterboard revision.

2 Where y is AN306 design revision.

Copyright © 2013 ARM Limited. All rights reserved. ARM DAI0306B
Non-Confidential