5.5.1. Building the example test program

A makefile is provided to assemble and link the test program (src/example1.s).

The following final files are generated by the build process:

hex/example1.hex

A hex image of the test.

bsi/example1.bsi

The JTAG instructions for the BST.

Note

The BST reads a file called JTAGbsi, in the directory that the simulation is run in. It is recommended that you link this to the bsi/example1.bsi file.

Copyright © 2000, 2001 ARM Limited. All rights reserved.ARM DDI 0158D
Non-Confidential